Manuale d’uso / di manutenzione del prodotto handheld terminals del fabbricante Casio
Vai alla pagina of 51
DT-X11 Series Hardware Manual (Version 1.01) CASIO Computer Co., Ltd. Copyright ©2006. All rights reserved. August 2006.
2 Table of Contents Editorial Record 4 Preface 5 Chapter 1. Overview of the Products 6 1.1. Features 6 1.2. Available Models 8 1.2.1. Options and Interfaces 9 1.3. General Guide 10 1.3.1. DT-X11 10 1.3.2. DT-167CHGE Car Mounted Batter y Charger 12 1.3.
3 5.3.4. HA-A20BAT/DT-5025L BAT 42 5.3.5. DT-894CFU CF Card Extension Unit 42 5.4. Reliability 43 5.4.1. DT-X11 43 5.4.2. DT-160IOE/DT-169CHGE 43 5.4.3. DT-5022CHG 44 5.5. Compliance 45 5.5.1. DT-X11 45 5.5.2. DT-160IOE/DT-169CHGE 45 Chapter 6. Cable Specifications 46 6.
4 Editorial Record Manual Version no. Date edited Page Content 0.90 February 2006 Tentative version 1.00 March 2006 Original version 8 The content in Table 1 .2 of Chapter 1.2 is corrected . 1.01 August 26 The content in Table 2 .9 of Chapter 2.7 is corrected .
5 Preface This reference manual descr ibes about the CASIO DT-X11 series handhel d terminals with C-MOS imager or Laser Scanner integrated. A new generation of handheld terminal h as been developed.
6 1. Overview of the Products 1.1 Features Incorporates .NET technology • Uses WindowsCE 5.0 operating system. • Makes effective use of .N ET resources developed by other corporations. • Employm ent of eMbedded OS makes it possible to buil d a flexible Window sCE system.
7 Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July 1 2006 The following prod ucts have been ass embled with devic es, components and parts manufactured using Lead (Pb) free solder.
8 1.2 Available Models Table 1.1 Li st of models Wireless Com municati on Memory Model Scan Engine Bluetooth IEE802.11b PC Card slot RAM FROM DT-X11M10E Las er Scanner Yes Yes Yes 64MB 128MB DT-X11M10.
9 1.2.1 Options and Interfaces Fig. 1.1 USB Por t ( Ver 1 . 1 Functio n ) PC IrDA Por t ( IrDA 1 . 1) Bridge Satellite Cradle DT - 160 IOE Power Supply Terminals ( Built - in Charge Circuit ) Car Moun.
10 1.3 General Guide 1.3.1 DT-X11 Left Front Right Back 22 23 24 25 21 18 19 1 2 4 3 5 7 9 6 8 10 11 12 13 14 18 17 16 15 20 Fig. 1.2 Table 1.4 Nam es of parts No. Name Description Indicates th e result of a ba r code reading or oth er read operation .
11 These keys can be assigned any func tion other than barcode reading. The following are the initial defa ult settings. 10 Function Keys F1 F2 F3 F4 : Deletes one character to th e left. : Inputs a hyphen (-). : Inputs a period (.). : Toggles to switch b etween numbers and alphabets.
12 1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator Lamp Power Contacts Remove button Car plug code jack Power Switch Fig. 1.3.
13 1.3.3 DT-160IOE Bridge Satellite Cradle The following ext ernal views show the DT-160IO E Bridge Satellite Cradl e. Refer to Table 1.5 for each referenced part on the DT-160IOE. Views 1 2 4 3 5 7 6 8 10 11 9 12 13 14 Back Top Front Right Bottom Fig 1.
14 No. Name Description 5 Wall Mount Unit Fastening Plate The holes in this plate accept screws that sec ure the wall mount unit in place. 6 Terminal Detect Switch This switch det ects when the Handh eld Terminal is not se ated correctly on the Bridge Satellite Cradle.
15 1.3.4 DT-169CHGE Cradle-type Battery Charger The following external views show the DT-169CHGE (Cradle-type Battery Ch arger). Refer to Table 1.6 for each referenced part on the DT-169CH GE. Views Back Top Front Right Bottom 1 2 3 4 6 7 5 Fig 1.2 Table 1.
16 1.3.5 DT-5022CHG Dual Battery Charger The following ext ernal views show the DT-502 2CHG (Dual Battery Charger). Ref er to Table 1.7 for each referenced part on the DT-5022CHG. Views Back Top Front 3 4 1 2 1 3 3 4 4 4 Fig 1.3 Table 1.7 Nam es of parts No.
17 2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specifi cation Remark CPU, Mem ory CPU Intel ® PXA255 Application Processor Operating clock; max 400 MHz RAM 64 MB FROM 128 MB (user area; approx. 1 15 MB) FlashFX built in. OS Microsoft ® W indows ® CE 5.
18 Laser Scanner (DT -X1 1M10E and DT -X1 1 M10RC) Method Semi-conductor laser light Laser emitting angle S traight W ave length 650±10 nm Optical output <1 mW No. of scannings 100±20 times per second Resolution 0.127 mm (minimum) PCS 0.45 (minimum ) Print contrast signal Readable distance Approximately 40 to 300 mm Max.
19 Bluetooth ® Standard Bluetooth ® Specification V er .1.2 Comm. range Approx. 3 m Depending on the surrounding conditions Output power Maximum. 3dBm ( Power Class 2) Serial in terface Sta ndard USB Slav e Mini B 5 Pi n. Baud rate Full speed (12 Mbps) Audio Earphone jack φ 2.
20 2.2 DT-160IOE Bridge Satellite Cradle Table 2.2 Item Specif ication Remark Standard IrDA V er . 1.1 co mpatible Comm. method Half duplex Synchronization Start/stop method IrDA Comm.
21 Input voltage DC 12V ±5% Consum ption current Approx. 1,600 mA When supplying power or transmitting data. Plug EIAJ RC-5320A type 4 Center; Plus Input from AC adaptor AC adaptor AD-S42120A E Output voltage DC 5V ±10% Output current 2,500mA(maximum) Charge m ethod Constan t voltage W ith cu rb function on current Approx.
22 2.3 DT-167CHGE Car Mounted Battery Charger Table 2.4 Item Specif ication Remark No. of LEDs 1 No. of display colors 2 In red and green Display content Power status (“POWER”) Indicates the status of terminal be ing mounte d on the char ger . Display Status LED OFF Flashing in green Flashing in red : Power is OFF .
23 2.4 DT-169CHGE Cradle-type Battery Charger Table 2.6 Item Specifi cation Remark No. of LEDs 1 No. of di splay col ors 2 In re d and gree n Display Status LED Display c ontent Powe r status (“ POWER”) Input Detection switch for DT -X1 1 terminal Push switch Input voltage DC 12V ± 5% Consumption current Approx.
24 2.5 DIP Switch Setting for DT-160IOE The DIP switch is located on the rear side of Br idge Sa tellite Cradle. Change th e ON/OFF settings according to y our required system configuration. T h e new settings do not go i nto effect until the power switch is tur ned off and then back on.
25 2.6 Status Indication with LEDs Various operational statuses on the DT-16 0IOE can be displayed usin g the LEDs. The followi ng table describes LED modes and their meanings.
26 2.7 DT-5022CHG Dual Battery Charger Basic Block Table 2.9 Item Specif ication Remark Basic function Rechargeable battery pack HA-A20BAT B at te r y p ac k DT-5025LBAT Large-cap acity battery pack Dedicated batteries only.
27 Charge output terminal CH1 PIN1: + 4.22V±30mV PIN2: - GND Charge output terminal CH2 PIN1: + 4.22V±30mV PIN2: - GND Input termin al DC jack Rated DC 16V, inpu t voltage DC 8.0 to 20.0 V Battery Charge Block Table 2.12 Item Specif ication Remark Char ge control Output voltage DC 4.
28 Table 2.13 Weight/Dimensions Item Specif ication Remark Weight Approx. 154 g Dimensions 100 (L) x 110 (W) x 49 (H) mm.
29 2.8 HA-A20BAT/DT-5025LBAT Table 2.14 Specifica tion Item HA-A20BAT DT-5025LBAT Remark Rated capacity 1,700 mAh 3,400 mAh 0.2C discharge Rated voltage 3.7 V 3.7 V 0.2C discharge Discharge end voltage 2.75V 2.75V Standard charge cu rrent 1.0 CA (=1.55 A) 0 to 40 ºC 1.
30 2.9 DT-894CFU CF Card Extension Unit Fig. 2.2 Table 2.15 Dimensions/Weig ht Item Specif ication Remark Approx. 70 (W) x 87 (D) x 13 (D) mm With standard size cover Dimensions Approx. 85 (W) x 78 (D) x 13 (D ) mm With lar ge size cover Approx. 40 g With standard size cover Weight Approx.
31 3. Interfaces 3.1 DT-X11 CF Extension Slot Table 3.1 Specifica tion Remark Interface CFA Rev.1.3 compatib le CF Type I/II 3.3V only Power voltage 3.3V±5% Supply current 300 mA (maximum) Pin Assignment Table 3.2 Memory Mode I/O Mode Memory Mode I/O Mode Name I/O Name I/O Pin no .
32 Table 3.3 IrDA interface Item Specif ication Remark Communication speed, modulation Standard IrDA V er . 1.1 compatible FIR 4 Mbps 4 -value PPM modulati on MIR 1.
33 Memory backup battery Battery t ype Button-shape Lithium rechargeable battery (CR-2032) Rated voltage 3.0 V Batte ry low warning Low main batte ry voltage VDET1: 3.4 V W arning di splay , but still operable . Forcible OFF VDET2: 3.0 V For cible OFF .
34 4. Product Identification and Reference Numbers On the back of the DT-X1 1 and its options , there is a bar code a nd numbers printed on label as shown in Fig 4.1 . This bar code is represente d by 15 digits of Co de128 symbology and by alphanumeric chara cters beneath the bar code .
35 5. Quality References This chapter will describe about references of the DT-X11 and i ts dedicated options concerned wi th environmental perform ance, compliance, mechanical and electric durability, etc. 5.1 Environmental Performances 5.1.1 DT-X11 Table 5.
36 5.1.3 DT-167CHGE Table 5.3 Item Specification Condition T em perature Operation 0 ºC to 40 ºC Stora ge -40 ºC to 85 ºC Humidity Operation 30 % to 80 %RH Storage 30 % to 95 %RH No condensation Storage in carton box T emper ature -10 ºC to 50 ºC Humidity 30 % to 90 %RH No conden sation 5.
37 5.1.5 HA-A20BAT/DT-5025LBAT Table 5.5 Item Specification Condition T em perature Operation 0 ºC to 40 ºC Non-operation -5 ºC to 50 ºC When battery is not char ged.
38 5.1.6 DT-894CFU Table 5.6 Item Specification Condition T em perature Operation -20 ºC to 50 ºC Non-operat ion -20 ºC to 70 ºC Humidity Operation 10 % to 80 %RH St orage 5 % to 90 %RH No condens.
39 5.2 Electrical Performances 5.2.1 DT-X11 Table 5.7 Item Specif ication Remark Power consumption DC2.5A/3.7 to 5.0 V Anti-static strength Malfunction ± 6 KV Destruction ± 12 KV 150 pF , 330 ohm 5.2.2 DT-160IOE/DT-169CHGE Table 5.8 Item Specif ication Remark Approx.
40 5.2.4 DT-5022CHG Table 5.10 Item Specif ication Remark Anti-static strength Malfunction ± 5 KV Destruction ± 10 KV - ESD method: 250 pF , 100 ohm - Probe: Finger type - Polar ity: ± 5.
41 5.3 Mechanical Performances 5.3.1 DT-X11 Table 5.13 Item Specification Condition Resistance to drop impact(height ) In bare cond ition 120 cm Onto concrete, three times on eac h of the 6 sides and 4 co rners.
42 5.3.4 HA-A20BAT/DT-5025LBAT Table 5.16 Item Specification Condition Resistanc e to vibra tion 1 G - 10 to 55 Hz, In X,Y , and Z directio ns - Reciprocally for 15 minutes - While the power is being turned off.
43 5.4 Reliability 5.4.1 DT-X11 Table 5.18 Item Specification Remark/Condition Backlight 5,000 hours At half-life period Scanner module 10,000 hours C-MOS Imager 300 ,000 hours USB co nnector 5,000 ti.
44 5.4.3 DT-5022CHG Table 5.20 Item Specif ication Remark MTBF 210,000 hours or more MIL-HDBK217F Protection from short Internal ci rcuit is protecte d fr om a short between the ch arge term inals.
45 5.5 Compliance 5.5.1 DT-X11 Table 5.21 Category Standard DT -X1 1M30 U DT -X1 1M10E DT -X1 1M30E DT -X1 1M10RC DT -X1 1M30RC Remarks UL1950 3 rd Edition Y es No No US EN60950-1 No Y es Y e s EU Safety GB4943 No Y es Y e s CCC FCC part 15 C, OET -65(SAR) Y e s No No US EN300328-2 V1.
46 6. Cable Specifications 6.1 For Chain Connection and Short Length Length; 1 meter or less Fig. 6.1 Table 6.1 Specifications of the cable Cable Conductor 20/0.1A Insulator Semi-hard mat eri al P. V.C. Core wire Finish of exter nal shape 20/0.1A Insulator P.
47 6.2 For Chain Connection and Long Length Length; 1 meter or longer Fig. 6.3 Pin layout diagram of cable for chain conn ection and long dista nce (pin-to-pin straight/ twist-pair connection) Wiring Fig. 6.4 Pin no. Signal 1 ORS+ 2 ORS- 3 OSD+ 4 OSD- 5 IRD+ 6 IRD Pin no.
48 7. Precautions 7.1 Handling Precautions for short-term storage (1 to 2 days period) • If the DT-X11 is to be st ored over holidays (inclu ding Saturday and Sunday), re place the HA-A20BAT (or DT-502 5LBAT) battery pack with full y charged one before it is stored.
49 7.2 Safety 7.2.1 Battery Pack/Memory Backup Battery Battery Pack • Never disassemble or retrof it the battery pack . The batte ry pack has safety mechanis m and protection m eans incorporated to avoid h azards. Should they b e damaged, the batt ery pack could becom e hot, generate sm oke, explode, or ignite.
50 • The battery pack has a specific polarity . Do not force it i nto the DT-X11 when installing. Check the pol arity. If the battery pack is c onnected backwards, it can be incorrectly charged and have an abnorm al chemical reaction i nduced, causing it to become hot, smoke, explode, or ignite.
51 7.2.2 General • Avoid exposing it to water and foreign matter. Sho uld foreign matter (m etal chips, water, liquid chemicals) enter inside the DT-X11, immediately tur n off it, remove the batteries , unplug the AC adaptor, then contact a CASIO distributor.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Casio handheld terminals è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Casio handheld terminals - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Casio handheld terminals imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Casio handheld terminals ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Casio handheld terminals, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Casio handheld terminals.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Casio handheld terminals. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Casio handheld terminals insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
