Manuale d’uso / di manutenzione del prodotto TC105B del fabbricante CLO Systems
Vai alla pagina of 29
CLO SYSTEMS, LLC 1501 W . Cameron Ave., Suite 215, W est Covina, California 91790 T (626) 939-4226 / F (626) 939-3378 WWW .CLOSYSTEMS.COM AUT OMA TED TIL T MOUNTING SYSTEM MANUAL FOR MODEL NUMBERS: TP.
CAUTION: When using this automated tilt mounting system, basic precautions should always be followed, including: • Follow the entire installation/user ’s manual and the important safety instructions before attempting to install or use this mounting system.
Supplied Parts and Hardware Before starting assembly , verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact the customer service number listed on the cover page 1. Never use damaged parts! Hardware and procedures for multiple mounting configurations are included.
[01] x 1 [02] x 1 [05] x 1 [06] x 1 [08] x 1 [07] x 1 [04] x 1 [03] x 1 [09] x 1 [10] x 1 [11] x 1 M4 x 12 mm M5 x 12mm M6 x 12 mm M8 x 16 mm M4 x 30mm M5 x 30mm M6 x 35mm M8 x 40mm M4 M5 M6 M8 M4 / M5 M6 / M8 M4 / M5 M6 / M8 5/16 in.
(2.5 in.) 6.35 cm [13] [12] 3/16 in. 5 mm 1.0 5 30.4 ~ 61.0 cm (12 ~ 24 in.).
1.0. Wood Stud W all Mounting Applications CAUTION: This product is not designed for use in metal stud walls. Do not over tighten the lag bolts [12]. T ighten the lag bolts only until they are firmly against the wall brackets [01]. Mount the wall bracket [01] to at least two (2) wooden studs spaced a minimum of 12 in.
[13] [12] [14] 1/2 in. 13 mm 1.1 >46 cm (18 in.) >15 cm (6 in.) [14] >15 cm (6 in.) >30 cm (12 in.) >30 cm (12 in.) >15 cm (6 in.) >64 m m (2.
1.1. Solid Concrete W all Mounting Applications CAUTION: Make sure concrete anchors [14] are seated flush with concrete surface. The gypsum drywall, lath, plaster , and the like covering may not exceed 1/2 in. (12.7 mm) thickness. CAUTION: Do not over tighten the lag bolts [12].
2.0 <=800 mm (31.5 in.) [02] [03] [04] 9 TP150B > 38.1 mm (1.5 in.) > 38.1 mm (1.5 in.) Digital optical audio output [29, 30] [23, 24, 25, 26] [15, 16, 17, 18].
2.0. Mounting TV with a flat back Note: The plastic cover (shown in dotted lines) is only provided on model number TP150B; but NOT on model number TC105B. The pin [04] is shipped pre-inserted into the “STORE” opening on the bracket [03]. Note: Most flat screen TVs are provided with Digital Optical Audio Output on the back of the TV .
2.1 <=800 mm (31.5 in.) 11 [02] [03] TP150B Digital optical audio output > 38.1 mm (1.5 in.) > 38.1 mm (1.5 in.) OPT [27, 28] [29] [29, 30] [23, 24, 25, 26] [19, 20, 21, 22] [04].
2.1. Mounting TV with a curved back or obstruction Note: The plastic cover (shown in dotted lines) is only provided on model number TP150B; but NOT on model number TC105B. Note: Most flat screen TVs are provided with Digital Optical Audio Output on the back of the TV .
3.0 13.
3.0. Hang TV onto the wall bracket Y ou may need assistance with lifting the TV . Remove the two screws on the bottom of the two brackets [02] and [03], and save these screws as they will be used in the following steps. Hang the two brackets [02] and [03] to the wall bracket [01].
4.0 [03] [02] [06] [07] [08] 15.
4.0. Electrical Connections Note: Select the right electrical prong [09, 10, or 1 1] for your electrical socket. (1) Refer to Section 9.0 and manually tilt the TV up, and insert the pin [04] to the “UP” opening to hold the TV up for easier electrical connections.
5.0 13 ~ ~ 17.
5.0. Adjusting the Tilt Note: Section 5.0 only applies to Model Number TP150B. For Model Number TC105B, skip this Section and go to the Section 7.0 (1) Use the down arrow button ( ) on the remote control [05] to fully tilt down the TV . Refer to Section 9.
6.0 [03] 19.
6.0. Removing the spring to tilt the TV down fully Make sure the TV is in the upright position before proceeding with these steps! (1) If the TV is not in the upright position, then use the up arrow button ( ) on the remote control [05] to tilt up the TV .
7.0 OPT 2 [02] 21.
7.0. Optional: Adjusting the upright position of the TV If desired, adjust the upright position of the TV by ± 2º by turning the bottom screw on the motorized bracket [02].
8.0 STORE UP P2 P1 STORE UP P2 P1 [03] [04] STORE UP P2 P1 23.
8.0. Setting the preset position Note: The pin [04] is shipped from the factory in the “STORE” opening. (1) Insert the pin [04] into the “P1” opening for maximum preset tilt of about 6º. (2) Insert the pin [04] into the “P2” opening for maximum preset tilt of about 9º.
9.0 25.
Remote Control Buttons Function Description Up Key ( ) T ilts the TV up. Down Key ( ) T ilts the TV down to a maximum of 13º. STOP Stops the movement. AUTO The factory default setting is Auto-Mode. If your TV is provided with a Digital Optical Audio Output, and the optical cable [08] has been installed as instructed in Section 4.
T roubleshooting 1. TV does not fully tilt down: a. Possible cause: The mounting system relies on the weight of TV to tilt down the TV . Check to see if there is any foreign object such as wire and cable stopping the TV from tilting down. If so, remove or relocate the foreign object.
W arranty CLO Systems, LLC warrants its products, under normal use, to be free from defects in material and workmanship for a period of one year from the date of purchase. W arranty covers parts only , and it does not cover labor . Thereafter , repairs will be made at established factory prices.
Disclaimer CLO Systems, LLC makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this mounting system.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il CLO Systems TC105B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del CLO Systems TC105B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso CLO Systems TC105B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul CLO Systems TC105B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il CLO Systems TC105B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del CLO Systems TC105B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il CLO Systems TC105B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo CLO Systems TC105B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
