Manuale d’uso / di manutenzione del prodotto 90003 del fabbricante Harbor Freight Tools
Vai alla pagina of 16
6” BENCH GRINDER Model 90003 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at: http://www .
PRODUCT SPECIFICA TIONS SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and as- sembly diagram. Keep your invoice with this manual.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 4.
11 . Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts. 12. A void accidental starting. Be sure the Power Switch is off before plugging in.
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 23. Use only accessories that are recommended by the manufacturer for your model.
15. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may af fect the safe operation of this product. Replace or repair damaged or worn parts immediately .
22. Always turn off the Bench Grinder and unplug it from its electrical outlet before changing accessories or performing any inspection, mainte- nance, or cleaning procedures. 23. W ARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur .
FIGURE A SKU 90003 P AGE 8 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must never be attached to an electrically “live” terminal.
SKU 90003 P AGE 9 EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
SKU 90003 P AGE 10 SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V olts Alternating Current Amperes No Load Revolutions per Minute (RPM) n o xxxx/min. A V ~ UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 15 are included.
SKU 90003 P AGE 1 1 3. Repeat Steps #1 and #2 to attach the Right T ool Rest (part #32) to the Right Wheel Guard (part #31). (See Figure D.) LEFT WHEEL GUARD (#27) RIGHT WHEEL GUARD (#31) RIGHT TOOL REST (#32) LEFT TOOL REST (#28) SCREW WITH LOCK W ASHER (#25) FIGURE D T o Attach The Spark Guards: 1.
SKU 90003 P AGE 12 T o Attach The Eye Shield Mounting Rods: 1. Insert one Screw (part #48) with a W asher (part #13) through a Bracket (part #36) and the Left Eye Shield Mounting Rod (part #49). Then, firmly tighten the Screw to secure the Left Eye Shield Mounting Rod to the body of the Bench Grinder .
SKU 90003 P AGE 13 LEFT EYE SHIELD MOUNTING ROD (#49) RIGHT EYE SHIELD MOUNTING ROD (#33) SCREW (#55) SCREW (#55) PRESSURE PLA TE (#50) PRESSURE PLA TE (#50) FIGURE G 2. There are two 1 1/32” diameter mounting holes located on the Base (part #15) of the Bench Grinder .
SKU 90003 P AGE 14 OPERA TING INSTRUCTIONS 2. Plug the Power Cord Plug (part #10) into the nearest grounded, 120 volt, electri- cal outlet. Then, turn the Power Switch (part #3) to its “ON” position and allow the Grinding Wheels (part #64) to spin up to full speed.
SKU 90003 P AGE 15 P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. SKU 90003 P AGE 16 ASSEMBL Y DIAGRAM 26 58 57 58 52 53 54 50 51 55 48 36.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Harbor Freight Tools 90003 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Harbor Freight Tools 90003 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Harbor Freight Tools 90003 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Harbor Freight Tools 90003 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Harbor Freight Tools 90003, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Harbor Freight Tools 90003.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Harbor Freight Tools 90003. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Harbor Freight Tools 90003 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.