Manuale d’uso / di manutenzione del prodotto TD40 NTSC del fabbricante InFocus
Vai alla pagina of 53
TD32/TD40 NTSC USER’S GUIDE.
Contents 1 OWNER'S MANUAL Forewor d Caution ...................................................................................................................................... 3 Important Safety Information ....................................
Contents 2 OWNER'S MANUAL Setting the Pictur e Changing the Picture Mode .................................................................................................... 29 Adjusting the User Mode .............................................
3 OWNER'S MANUAL CAUTION - T O PREVENT DAMAGE WHICH MA Y RESUL T IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION These servicing instructions are for use by qualified service personnel only .
Caution 4 OWNER'S MANUAL Always be careful when using your the Monitor . T o reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions.
5 OWNER'S MANUAL Follow all operating and use instructions. Do not use the Monitor where contact with or immersion in water is a possibility , such as near bath tubs, sinks, washing machines, swimming pools, etc. When installing the Monitor on a table, be careful not to place it too close to the edge of the table.
Impor tant Safet y Information 6 OWNER'S MANUAL Provide ventilation for the Monitor . The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug or other similar surface.
7 OWNER'S MANUAL Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor , be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFP A No.
Impor tant Safet y Information 8 OWNER'S MANUAL When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
9 OWNER'S MANUAL Select the signal source from multiple input sources such as TV , A V 1, A V 2, S-Video / A V , Component1, Component2, PC and DVI. To change the CHANNEL, Press button first and change the CHANNEL with , buttons. To change the VOLUME, Press button first and change the VOLUME with , buttons.
Viewing the Connecting Panel 10 OWNER'S MANUAL To control from PC. For PC, Set top box. PC/DVI Audio Input. For PC, Set top box. For DVD, Set top box. For Component Audio Input. To connect speakers (2CH, Stereo) For VCR, DVD, Set top box. For VCR, DVD, Set top box.
11 OWNER'S MANUAL 2 3 5 4 6 7 8 3 2 5 4 6 7 8 PC The Monitor 3-Wire (Non-standard) AUDIO INPUT COMPOSITE VIDEO INPUT COMPOSITE VIDEO OUTPUT S-VIDEO INPUT COMPONENT VIDEO INPUT ANALOG RGB INPUT DI.
Viewing the Remote Control 12 OWNER'S MANUAL Power T urn the Monitor on and off. Mute T emporarily cut the sound and restore it. Pre.CH T urn to the previous channel or exit OSD. V .Size Choose the Screen Form. Wide ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 FA VORITE (F A VOURITE) T une to your next favorite channel.
13 OWNER'S MANUAL MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ SAP • Y ou can select only available modes depending on the source. CH INFO Display the current information about time, screen form, source and MTS mode.
Viewing the Remote Control 14 OWNER'S MANUAL Source key : Change the source of the PIP window . The available sources are shown as below . Move key : Move the position of PIP window . Swap key : Swap the sources of the main screen and PIP window .
15 OWNER'S MANUAL Close the cover until it clicks. Load two AAA batteries, taking care that the + and - ends face the correct direction. Press on the cover and slide in the direction of the arrow .
Installation 16 OWNER'S MANUAL < The Monitor can be installed on the desk as shown above. > • T able Stand mount minimum allowable clearances for adequate ventilation. T able Stand Installation (Optional) 1.18 inch (3Cm) 2.36 inch (5.99Cm) 4 inch (10.
17 OWNER'S MANUAL • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker . Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire to the "-" input.
Connecting the T V Cable 18 OWNER'S MANUAL 1 2 3 4 Connecting the TV Cable Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. Use CH+, CH- button or numeric button to change TV channel for your channel selection.
19 OWNER'S MANUAL Press INPUT button on the remote control and select V ideo Sources. Insert a video tape into the VCR and press the PLA Y button on the VCR. W ith S-V ideo Connect a S-Video cable to the S-V ideo jacks of the VCR and the Monitor .
Connecting the DVD 20 OWNER'S MANUAL T urn on the DVD player . Press INPUT button on the remote control of the Monitor and select Component1 or Component2. • Connect the three separate component video cables to the DVD player's Y , Pb and Pr jacks and to the Component jacks on the Monitor .
21 OWNER'S MANUAL T urn on the Set T op Box. Press INPUT button on the remote control of the Monitor and select Component1, Component2, PC or DVI. Connect Set T op Box video inputs to A V , COMPONENT , PC or DVI jacks on the Monitor . Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
Connecting the PC (D-Sub & DVI) 22 OWNER'S MANUAL Pin Configuration 15Pin Signal Cable (based on protruded pin) To watch the PC screen T urn on the Monitor and press INPUT button to select the PC MODE. T urn on the PC and check for the PC requirements.
23 OWNER'S MANUAL 31.468 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 45.913 53.01 1 64.062 35.156 37.879 48.077 46.875 53.674 56.000 64.016 49.725 31.468 48.363 56.476 60.023 47.700 64.000 70.09 85.08 70.08 85.03 59.94 66.66 72.80 75.
Basic Operation 24 OWNER'S MANUAL Press the Power button on the remote control. The Monitor will turn on and you will be ready to use its features. Y ou can also use the Power button on the front panel. Press INPUT button on the remote control. Then you can see the source list menu shown as below .
25 OWNER'S MANUAL • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. EXAMPLE of OSD Menu Main Menu Press Menu/Set button on the remote control to enter the main OSD menu.
Setting the Channel 26 OWNER'S MANUAL Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC). Press Menu/set button to display the main OSD menu.
27 OWNER'S MANUAL The Fine T uning function lets you manually adjust the Monitor's tuner if you have difficulty tuning analog Channels. Press Menu/set button to display the main OSD menu. Press Menu/set button to display the main OSD menu. Select the TV main menu item.
Setting the Channel 28 OWNER'S MANUAL a Set the favorite channel Y ou can store of your favorite channels for each available input source (such as TV or CA TV).
29 OWNER'S MANUAL Y our the Monitor has 3 automatic factory preset picture settings (“ Standard ”, “ V ivid ” and “ Mild ”). Y ou can choose Standard , V ivid or Mild by pressing “Picture” button on the remote control (or by making a selection from the menu).
Setting the Picture 30 OWNER'S MANUAL Picture Mode is to set CH+ or adjust Picture Adjust, Mode, Video Noise Reduction, Screen Format and Burn Protection. Adjust USER Mode Y ou can change the Contrast, Brightness, Color , and Sharpness according to personal preference in USER mode.
31 OWNER'S MANUAL Contrast Adjust brightness difference between bright part of the screen and dark part. Brightness Adjust brightness of the screen. Color Adjust deep and light color of the screen. T int Adjusts the balance between green and yellow .
Setting the Picture 32 OWNER'S MANUAL Y our the Monitor has 5 screen temperatures (color settings): Press Menu/set button to display the main OSD menu. Select the picture main menu. Press Menu/Set to enter the picture menu. Select T emperature and press Menu/Set to enter the sub menu.
33 OWNER'S MANUAL This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. Press Menu/Set button to display the main OSD menu. Select the picture main menu item. Press Menu/Set to enter the sub menu.
Setting the Picture 34 OWNER'S MANUAL Screen Format Description W ide Wide video: No change. 4:3 video: Expands 4:3 video signal horizontally to fit the Wide screen. Panorama Wide video: No change. 4:3 video: Expands 4:3 video horizontally to fit the Wide screen and to minimize distortion, sides are expanded more than center .
35 OWNER'S MANUAL In PC mode, you can adjust the H, V -Position, Native Mode and Phase. Also you can adjust them automatically . Y ou can change H, V -Position, Native Mode and Phase in PC mode like usual PC monitors. Yo u can also adjust them automatically .
Setting the Picture ( PC ) 36 OWNER'S MANUAL H-POSITION V -POSITION PHASE Mismatch Match.
37 OWNER'S MANUAL Y our the Monitor has four automatic sound settings ("Standard", "Movie", "Music" and "News") that are preset at the factory .
Setting the Sound 38 OWNER'S MANUAL Y ou can use the OSD menu to change the T reble, Bass, Balance and DRC according to your preference. Equalizer menu appear when you select USER mode. Select a gain bar with VOL+, VOL- button on the remote control and adjust it with CH+/CH- button.
39 OWNER'S MANUAL This function adjust sound volume level automatically depending on the source. Press Menu/set button to display the main OSD menu. Select the SOUND main menu. Press Menu/Set to enter the sub menu. Select AV C and press VOL+ button to enter the ¥ parts.
Setting the Others 40 OWNER'S MANUAL Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. Press Menu/set button to display the main OSD menu. Select the SET UP main menu with CH+/CH- button on the remote control. Press Menu/Set to enter the sub menu.
41 OWNER'S MANUAL SMALL LARGE TWIN Source in PIP Change the source of the PIP window . Select Source and press Menu/Set to enter the sub menu. Then the PIP sub menu appear . The available sources will be displayed. Select the source and press Menu/Set button.
Setting the Others 42 OWNER'S MANUAL Position in PIP Change the position of the PIP window . Select Position with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the PIP sub menu appear . In Sub Menu, there are four positions.
43 OWNER'S MANUAL Set ID in Advanced Set the ID of the Monitor for mass-controlling through the serial port. Select Set ID and press VOL+ button to enter the ¥ part. Then the cursor moves into the ¥ part. Adjust with CH+ / CH- button and press BACK button.
Setting the Others 44 OWNER'S MANUAL Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. Press Menu/set button to display the main OSD menu. Select the SET UP main menu with CH+/CH- button on the remote control.
45 OWNER'S MANUAL TV Blocking in V -Chip Y ou can set up Restrictions Using the "TV Parental Guidelines" of FCC. Select TV Blocking with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the TV Blocking sub menu appear .
Setting the Others 46 OWNER'S MANUAL Change Password in V -Chip Select Change Password with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the Pass W ord change sub menu appear . Enter the new password with numeric buttons on the remote control.
47 OWNER'S MANUAL In the TIME menu, you can set the current time and auto power on / off. Set the current time. Press Menu/set button to display the main OSD menu. Select the TIME main menu. Press Menu/Set to enter the sub menu. Select T ime Set by pressing VOL+ button.
Setting the Time 48 OWNER'S MANUAL Set the channel when the Monitor power turn on automatically . • Available only when the T ime is set and On Time is ON. Press Menu/set button to display the main OSD menu. Select the TIME main menu with CH+/CH- button on the remote control.
49 OWNER'S MANUAL This the Monitor can be set to turn off automatically at specific times that you choose. Before using the timer , you must set the Monitor's clock as described previously . Press Menu/set button to display the main OSD menu.
Troubleshooting 50 OWNER'S MANUAL If your monitor is not working properly , please scan this list of problems and possible solutions. It may save you time and money .
51 OWNER'S MANUAL Warrant y Card Limited W arranty Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Corporation ("InFocus") warrants that the LCD Thin Display Devi.
Warrant y Card 52 OWNER'S MANUAL Limited W arranty Period The Limited W arranty periods hereof commence on the date of purchase by the end-user customer .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il InFocus TD40 NTSC è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del InFocus TD40 NTSC - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso InFocus TD40 NTSC imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul InFocus TD40 NTSC ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il InFocus TD40 NTSC, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del InFocus TD40 NTSC.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il InFocus TD40 NTSC. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo InFocus TD40 NTSC insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
