Manuale d’uso / di manutenzione del prodotto NetLinx NXM Series del fabbricante AMX
Vai alla pagina of 54
Operation/Reference Guide Controllers NetLinx ® Cardframe, Control Cards, and NetModules NXC, NXF, and NXM Series Last Revised: 1/8/2009.
AMX Limited Warranty and Disclaimer AMX Corporation warrants its product s to be free of defects in material and workmanship under normal use for three (3) years fr om the date of purchase from AMX Co.
Software License and Warranty Agreement LICENSE GR ANT . AMX grants to Licens ee the non-exc lusive righ t to use the AMX So ftware in the manner de scribed in this Licens e. The AMX Softwar e is licensed, not sold . This lic ense does not grant Licensee the right to creat e derivati ve works of the AMX So ftware.
.
Table of Contents i Enter the Document Name Here Table of Contents NXF CardFrame and NetModules ......................... ............................................. 1 NXF CardFrame ......................... .................... ....................
ii Enter the Document Name Here Table of Contents NXC-VAI4 Analog Voltage Control Ca rd ......................... ........................ ......... 29 Specifications ............... .................... .................... ........................ .
NXF CardFrame and NetModules 1 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXF CardFrame and NetModules NetLinx Control Cards can be installed in the NetLinx ® (NXF) CardFrame, th e NI-4000, or in modules for stand-alone operation.
NXF CardFrame and NetModules 2 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXF Cardframe Specifications Mounting Master/Hub Cards in an NXF CardFrame NetLinx Master and Hub Ca rds can be installed in the NXF CardFr ame. The card mount s in a horizontal position, through the master ca rd slot on the rear panel of the NXF encl osure.
NXF CardFrame and NetModules 3 NetLinx Cardfram e, Contro l Cards, an d NetModu les Setting the CardFrame 's starting address The 8-position CardFrame Number DIP switch, located on the rear of the CardFrame (FIG.
NXF CardFrame and NetModules 4 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXS-NMS NetModules The NXS-NMS NetModules ( FG2009-10 ) accommodate one Ne tLinx Control Card, and connect to the NetLinx bus via ICSNet connections . The NetModules of fer a simple and economical way to integrate additional functionality to control systems.
NXF CardFrame and NetModules 5 NetLinx Cardfram e, Contro l Cards, an d NetModu les Installing Control Ca rds into an NXF CardFrame 1. Remov e the magnetic front faceplat e/vie wing window from the CardFrame. 2. Align the edge of the Control Card with a slot in the CardFr ame.
NXF CardFrame and NetModules 6 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-COM 2 Dual COM P ort Control Ca rd 7 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Dual COM Port Control Card The NXC-COM2 Dual COM Port Control Card ( FG2022 ) provides tw o RS-232, RS-422, or RS-485 control ports and LED feedback for remote sources connected to the NetL inx CardFrame, NI-4000 or NetModule.
NXC-COM2 Dual COM Port Control Card 8 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts and Wiring Configuration NXC-COM2 Channel Assignment NXC-COM2 Pinouts NXC-COM2 Wiring Configuration Pin.
NXC-COM 2 Dual COM P ort Control Ca rd 9 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Programming Information NXC-COM2 Send_Commands NXC-COM2 Send_Commands Command Description B9MOFF Disable 9-bit in 232/422/ 455 mode. This command works in conjunction with the B9MON command.
NXC-COM2 Dual COM Port Control Card 10 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-COM2 Send_Commands (Cont.) Command Description GET BAUD Get the RS-232/422/485 port’s current communication par am ete rs . Device sends the response out the Master program p ort.
NXC-COM 2 Dual COM P ort Control Ca rd 11 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Send_Commands (Cont.) Command Description SET BAUD Set the RS-232/422/485 port's communication par am ete rs .
NXC-COM2 Dual COM Port Control Card 12 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-COM2 Send_String Escape Sequences NXC-COM2 Send_Commands (Cont.
NXC-COM 2 Dual COM P ort Control Ca rd 13 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Send_String Es cape Sequences (Cont.) Command Description 27,20,1 Set the RTS hardware handshake's output to low/inactive (< 3V).
NXC-COM2 Dual COM Port Control Card 14 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-I/O10 In put/Outp ut Contro l Card 15 NetLinx Cardframe, Control Cards, and NetMod ules NXC-I/O10 Input/Output Control Card The NXC-I/O10 Input/Output Control Card ( FG2021 ) provides 10 Input/Outp ut channels and LED feedback. It acts as a logic-lev el input and responds to switch clos ures o r voltage le vel (high/ lo w) changes.
NXC-I/O10 Input/Output Control Card 16 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and I/O Mode Functions NXC-I/O10 Channel Assignments NXC-I/O10 Pinouts, Signals, and I/O Mod.
NXC-I/O10 In put/Outp ut Contro l Card 17 NetLinx Cardframe, Control Cards, and NetMod ules Setting the Switch/Voltage Mode Jumpers The NXC-I/O10 responds to switch cl osures or voltage-le vel (high/low) changes. Compa tible I/O devices include the Po wer Control Sensor (PCS ), tape transports and limit switches.
NXC-I/O10 Input/Output Control Card 18 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-IRS4 4-Port IR/S Control Card 19 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 4-Port IR/S Control Card The NXC-IRS4 4-Port IR/S Control Card ( FG2023 ) provides four IR/ Serial input c ontrol ports wi th LED status feedback. Each port in the NXC -IRS4 stores programmed comman ds for IR- or serial-controlled dev ices.
NXC-IRS4 4-Port IR/S Control Card 20 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and Functions NXC-IRS4 Channel Assignments The NXC-IRS4 channel settings list ed in the fo llo wing table set the IR output channels. The NXC-IRS4 can process up to two IR or serial de vice channel setting comm ands si multaneously .
NXC-IRS4 4-Port IR/S Control Card 21 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description CH Send IR pulses for the selected a channel. All channels below 100 are transmitted as two digits. If the IR code for ENTER (function #21) is loaded, an Enter will follow the number .
NXC-IRS4 4-Port IR/S Control Card 22 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-IRS4 Send_Commands (Cont.) Command Description GET MODE Poll the IR/Serial port's configuration parameters and report the active mode settings to the device requesting the information.
NXC-IRS4 4-Port IR/S Control Card 23 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description PON T urn ON a device connected to an IR port based on the status of the corresponding I/O Link input.
NXC-IRS4 4-Port IR/S Control Card 24 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-IRS4 Send_Commands (Cont.) Command Description SET INPUT LINK Sets an IR device to link to an input channel for use with 'PON' and 'POF' commands.
NXC-IRS4 4-Port IR/S Control Card 25 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description XCHM Changes the IR output pattern for the 'XCH' send command.
NXC-IRS4 4-Port IR/S Control Card 26 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-REL10 Relay Control Card 27 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-REL10 Relay Control Card The NXC-REL10 Relay Control Card ( FG2020 ) provides ten relays that suppor t devices that emplo y simple momentary or latching contact-cl osure control, with LED feedba ck.
NXC-REL10 Relay Control Card 28 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-REL10 Connections/Wiring The NXC-REL10 Control Card has 10 relays that are i ndependently controlled and el ec trically isolated. The relay contacts are rated for a maximum of 1 A @ 0- 24 V A C or 0-28 VDC (resistiv e).
NXC-VAI4 Analog Voltage Control Card 29 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Analog Voltage Control Card The NXC-V AI4 Analog V oltage Control Card ( FG2025 ) provides four independent analog-to-digital inputs and four independent digital-to-ana log outputs, which are controllable over the ICSP netw ork.
NXC-VAI4 Analog Voltage Control Card 30 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts and Functions NXC-VAI4 Specific ations (Cont.) I/O S tatus LEDs 1-8: (two LEDs per channel) LEDs light to indicate ON status. • 4 yellow LED's (one per channel) li ght to indicate input signal changes reported to the Master .
NXC-VAI4 Analog Voltage Control Card 31 NetLinx Cardfram e, Contro l Cards, an d NetModu les Channel Assignments The channel ON/OFF assignments for the NXC-V AI 4 are described in the follo wing table. Off = 50% v oltage, and all channel as signments are mutually e xclusive .
NXC-VAI4 Analog Voltage Control Card 32 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Channel Assignments (Cont.) Channel State Function Channel 17 ON While channel 17 is ON, the voltage on Output 4 is set to 0% OFF Sets Output 4 voltage to 50%.
NXC-VAI4 Analog Voltage Control Card 33 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Output Level Assignments NXC-VAI4 Output Level Assignments Lev e l Descriptio n 1 8 bit field; sets voltage on Output 1 to the value commanded. The range is 0-255.
NXC-VAI4 Analog Voltage Control Card 34 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Input Level Assignments Programming Information These NetLinx Send_Commands control the NXC-V AI4: NXC-VAI4 Input Level Assignments Lev el Description 1 8 bit field, returns the current output voltage code for Output 1 (rang e= 0 to 255).
NXC-VAI4 Analog Voltage Control Card 35 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description GAS Sets the slowdown distance and slowdown speed.
NXC-VAI4 Analog Voltage Control Card 36 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Send_Com mands (Cont.) Command Description GS Sets the speed variable to be used for future positional (GL) commands. The change of speed takes place imm ediately even if a positional change operation is currently in p rogress.
NXC-VAI4 Analog Voltage Control Card 37 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description PE Selects which voltage reference (if any) is to be used for scaling of the output voltage. The specified output will then remain proportional to the specified input.
NXC-VAI4 Analog Voltage Control Card 38 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Send_Com mands (Cont.) Command Description PN Sets the value of either the minimum output voltage allowed for an output, or the minimum position voltage expected for an input.
NXC-VAI4 Analog Voltage Control Card 39 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description PX Sets the value of "I/O <x> MAXIMUM" which is either the maximum output voltage allowed for an Output, or the maximum position voltage expected for an Input.
NXC-VAI4 Analog Voltage Control Card 40 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-VOL4 Volume Control Card 41 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VOL4 Volume Control Card The NXC-VOL4 V olu me Control Card ( FG2024 ) provides four discrete v olu me control channels with LED feedback.
NXC-VOL4 Volume Control Card 42 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and Functions NXC-VOL4 Specifications (Cont.) Gain jumpers 1-4 • Unity Maximum Input Level: +10dB.
NXC-VOL4 Volume Control Card 43 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VOL4 Connections/Wiring The NXC-V OL4 card contains four a udio v olume control channels. E ach line-le vel channel is isolated from system ground and can be configured for balanced or unbalanced line operatio n.
NXC-VOL4 Volume Control Card 44 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VOL4 Levels V olume (audio) channels 1 and 2 use le vels 1 and 2 respecti vely . For reading curre nt volume lev els and displaying bargraphs see CREA TE_LEVEL and SEND_LEVEL .
NXC-VOL4 Volume Control Card 45 NetLinx Cardfram e, Contro l Cards, an d NetModu les Programming Information These NetLinx Send_Commands control the NXC-V OL4.
NXC-VOL4 Volume Control Card 46 NetLinx Cardframe, Co ntrol Cards, and Net Modules.
NXC-VOL4 Volume Control Card 47 Enter the Document Name Here.
1/09 © 2009 AMX. All rights reserved. AMX and the AM X logo are register ed trademarks of AMX. AMX reserves the ri ght to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AMX NetLinx NXM Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AMX NetLinx NXM Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AMX NetLinx NXM Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AMX NetLinx NXM Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AMX NetLinx NXM Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AMX NetLinx NXM Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AMX NetLinx NXM Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AMX NetLinx NXM Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
