Manuale d’uso / di manutenzione del prodotto rx-8010vbk del fabbricante JVC
Vai alla pagina of 64
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0618-001A [J] RX-8010VBK AUDIO/VIDEO CONTROL RECEIVER + − + − + − 23 1 56 4 89 7/P 0 +10 10 LINE DIF.
G-1 W arnings, Cautions and Others/ Mises en garde, précautions et indications diverses CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
G-2 For Canada/pour Le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
1 T able of Contents Creating a Sur round Field in Y our Room ....... 24 7 Surround modes .................................................................... 24 7 DSP modes ........................................................................... 24 Reproducing the Sound Field .
2 Par ts Identification Become familiar with the buttons and controls on the receiver before use. Refer to the pages in parentheses for details. CONTROL + − + − + − 23 1 56 4 89 7/P 0 +10 10 LINE DIF .
3 Getting Star ted This section explains how to connect audio/video components and speakers to the receiver , and how to connect the power supply . Before Installation General • Be sure your hands are dry . • T urn the power of f to all components.
4 Basic connecting procedur e 1 Cut, twist and remo ve the insulation at the end of each speaker signal cable (not supplied). 2 T ur n the knob counterclockwise.
5 Connecting the rear and center speakers Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals. Turntable Turntable Connecting the subwoofer speaker Y ou can enhance the bass by connecting a subwoofer .
6 Cassette deck or MD recorder V ideo component connections Use the cables with RCA pin plugs (not supplied). Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack.
7 VIDEO FRONT RIGHT LEFT DVD TV SOUND DBS OUT (REC) IN (PLAY) VCR1 OUT (REC) IN (PLAY) VCR2 MONITOR OUT S-VIDEO VIDEO AUDIO COMPONENT VIDEO MONITOR OUT DBS DVD Y P B /C B P R /C R A D B C Video camera The VIDEO input terminals on the front panel are con venient when connecting and disconnecting the equipment frequently .
8 PCM/DOLBY DIGITAL /DTS DIGITAL OUT DVD DIGITAL IN DIGITAL 3 (TV) DIGITAL 4 (CDR) DIGITAL 2 (CD) DIGITAL 1 (DVD) DBS Digital Connections This receiv er is equipped with four DIGIT AL IN terminals — one digital coaxial terminal and three digital optical terminals, and one DIGIT AL OUT terminal.
9 * Microsoft R , Windows R 98, Windows R Me and Windows R 2000 are registered trademarks of Microsoft cor poration. USB Connection This receiv er is equipped with a USB terminal on the front panel. Y ou can connect your PC to this terminal and enjoy sound reproduced through your PC.
10 Connecting the Power Cord Before plugging the receiv er into an AC outlet, make sur e that all connections hav e been made. Plug the power cord into an A C outlet. K eep the power cord aw a y from the connecting cables and the antenna. The po wer cord may cause noise or screen interference.
11 Fr om the remote contr ol: T o turn on the power , press A UDIO PO WER. The ST ANDBY lamp on the front panel goes off. The name of the current source and Surround/DSP mode appear on the display . T o turn off the power (into standby mode), press A UDIO PO WER again.
12 Notes: • When connecting an MD recorder (to the T APE/MD jacks), and a DBS tuner (to the TV SOUND/DBS jacks), change the source names shown on the displa y . For details, see page 16. • When y ou press one of the source selecting buttons on the remote control marked with an asterisk ( * ), the receiver automatically turns on.
13 MUTING Selecting the Front Speakers IMPORT ANT: Y ou can activate two pairs of the front speakers at the same time only when the SPEAKER LOAD SELECTOR switch on the rear panel is set to “HIGH” and when no signals are sent to the center and rear speakers.
14 SUBWOOFER OUT ON/OFF Activating the Subwoofer Sound Y ou can cancel the subwoofer sound e ven though you hav e connected a subwoofer and ha ve set “SUBWOOFER” to “YES” (see page 17). This is useful when enjo ying surround sound at night. On the front panel ONLY: Press SUBW OOFER OUT ON/OFF to cancel the subwoofer sound output.
15 Using the Sleep T imer Using the Sleep T imer , you can fall asleep to music and kno w the receiv er will turn off by itself rather than play all night.
16 When changing the source name from “TV” to “DBS”: • Pr ess and hold SOURCE NAME (TV SOUND/DBS) until “ASSGN. DBS” appears on the display .
17 C T SETTING CONTROL DOWN UP Setting the Speakers for a Surr ound Field T o obtain the best possible sur round sound of the Surround and DSP modes, you have to re gister the information about the speakers arrangement after all connections are completed.
18 CONTROL DOWN UP C T SETTING E CT SETTING CONTROL DOWN UP Center Delay T ime Setting Register the delay time of the sound from the center speak er, comparing to that of the sound from the front speakers. If the distance from your listening point to the center speaker is equal to that to the front speakers, select 0 ms.
19 Low Frequency Effect Attenuator Setting If the bass sound is distorted while playing back a source using Dolby Digital or DTS Digital Surround, follo w the procedure below . On the front panel ONLY: 1. Press SETTING r epeatedly until “LFE A TT” (Low Frequency Effect Attenua tor) appear s on the display .
20 TV SOUND/DBS VIDEO VCR 2 VCR 1 DVD DVD MULTI FM / AM USB AUDIO TAPE / MD CDR CD PHONO SOURCE NAME SOURCE NAME Selecting the Analog or Digital Input Mode When you hav e connected digital source comp.
21 CONTROL DOWN UP C T SETTING NORM (Normal) TEXT Showing the T ext Information on the Display When you hav e connected an MD recorder or CD player equipped with TEXT COMPU LINK remote control system (see page 42), you can show the te xt information, such as disc title or track title, on the display of this recei ver .
22 Using Preset T uning Once a station is assigned to a channel number , the station can be quickly tuned. Y ou can preset up to 30 FM and 15 AM stations. T o store the pr eset stations Bef ore you start, r emember ... • There is a time limit in doing the following steps.
23 T o tune in a preset station On the front panel: 1. Press FM/AM to select the band (FM or AM). The FM/AM lamp on the front panel b utton lights up. The last recei ved station of the selected band is tuned in. • Each time you press the button, the band alternates between FM and AM.
24 Cr eating a Sur r ound Field in Y our Room The built-in Surround Processor provides Surround mode and four types of the DSP (Digital Signal Processor) mode — DAP (Digital Acoustic Processor) mode, 5 CH/4 CH Stereo mode, 3D-PHONIC mode, and HEADPHONE DSP mode.
25 Reproducing the Sound Field The sound heard in a concert hall or club consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls.
26 Available DSP Modes According to the Speaker Ar rangement A vailable DSP modes will vary depending on ho w many speakers are used with this recei ver .
27 9 ∗ CENTER +10 ∗ REAR R 100 + 0 ∗ REAR L FM MODE 5. Select the speaker y ou want to adjust. • T o select the center speaker le vel, press CENTER. “CTR” appears on the remote control display window . • T o select the left rear speaker le vel, press REAR L.
28 2. Press SURR OUND ON/OFF to activ ate an appropriate Surround mode — PR O LOGIC, DOLBY DIGIT AL or DTS SURROUND . The SURR OUND ON/OFF lamp on the front panel button lights up. • Each time you press the button, the Surround mode turns on and of f alternately .
29 4. Adjust the ov erall levels of the effect. 1) Press EFFECT re peatedly until “EFFECT” appears on the display . The display sho ws the current setting.
30 MENU 4 TEST TEST TONE L (Left front speaker) TEST TONE LS (Left rear speaker) TEST TONE RS (Right rear speaker) TEST TONE C (Center speaker) TEST TONE R (Right front speaker) 9.
31 EFFECT 1 EFFECT 2 EFFECT 3 EFFECT 4 EFFECT 5 3 SIZE ROOM ROOMSIZE 1 ROOMSIZE 5 ROOMSIZE 4 ROOMSIZE 2 ROOMSIZE 3 6 LIVENESS LIVENESS 1 LIVENESS 5 LIVENESS 4 LIVENESS 2 LIVENESS 3 SURROUND ON/OFF CONTROL DOWN UP 3.
32 EFFECT SETTI N 7. Adjust the r oom size (sense of spaciousness). 1) Press EFFECT re peatedly until “R OOM SIZE” appears on the display . The display sho ws the current setting. 2) Press CONTR OL UP 5 /DO WN ∞ to select the room siz e you want.
33 4. Press LEVEL +/– to adjust the speaker output le vels (–10 dB to +10 dB). 5. Press SOUND . • T o adjust other speaker output le vels, repeat steps 3 and 4. 6. Press CTR T ONE to select the center tone lev el you want — f or 5 CH Ster eo mode only .
34 4. Adjust the ov erall levels of the effect. 1) Press EFFECT re peatedly until “EFFECT” appears on the display . The display sho ws the current setting.
35 Using the DVD MUL TI Playback Mode This receiver provides the DVD MUL TI playback mode for r epr oducing the analog discrete output mode of the DVD player .
36 Using the On-Scr een Menus Y ou can use the Menus on the TV screen to control the receiver . T o use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’ s input mode to the proper position to which the receiver is connected.
37 Adjusting the Equalization Pattern (Also see page 15) 1. Press MENU . The MENU appears on the TV . • Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the MENU. 2. Press 5 / ∞ to move to “SOUND CONTROL, ” then press 2 / 3 . The SOUND CONTR OL menu appears.
38 5. Press 5 / ∞ to move to the item y ou want to set or adjust, then pr ess 2 / 3 . On this adjustment menu, you can do the following: “L/R B ALANCE”: Adjust the right and left balance of the front speakers. “CENTER LEVEL”: Adjust the center speaker output lev el.
39 Operating the T uner (Also see pages 22 and 23) 1. Select FM or AM as the playing sour ce. Press FM/AM. 2. Press MENU . The MENU appears on the TV . • Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the MENU. 3. Press 5 / ∞ to move to “TUNER CONTR OL, ” then press 2 / 3 .
40 Setting the Basic Setting Items (Also see pages 16 – 21) 1. Press MENU . The MENU appears on the TV . • Pressing one of the 5 / ∞ / 2 / 3 buttons also displays the MENU. 2. Press 5 / ∞ to move to “SETTING, ” then press 2 / 3 . The SETTING 1 appears.
41 COMPU LINK Remote Contr ol System The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver .
42 TEXT COMPU LINK COMPU LINK – 4 (SYNCHRO) TEXT COMPU LINK Remote Contr ol System The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in the CD T ext* and MDs.
43 On-Screen Operation buttons (on the remote control) CONTROL + − + − + − 23 1 56 4 89 7/P 0 +10 10 LINE DIF .ECT BOOST EFFECT MENU ENTER SIZE ROOM BASS MODE TEST CTR TONE LIVENESS MIDNIGHT SOU.
44 Searching for a Disc (Only for the CD player) Search for a disc by its per former: 1. Press TEXT DISPLA Y while “CD” is selected as the source. The Disc Information screen appears on the TV . 2. Press 5 / ∞ to move to “SEARCH, ” then press SET .
45 Entering the Disc Information For the CD Player with the disc memory function: Y ou can use the disc memory function through this receiv er . The disc information (its performer , disc title, and music genre) of normal audio CDs will be stored into the memory built in the CD player .
46 For the MD recor der: Y ou can write the disc information (disc title and song titles) into the disc. Y ou can only write the song title for the song currently selected.
47 A V COMPU LINK Remote Contr ol System The A V COMPU LINK remote control system allows you to operate JVC video components (TV , VCR, and DVD player) through the receiver . This receiv er is equipped with the A V COMPU LINK-III, which added a function to operate JVC video components through the video components terminals.
48 One-T ouch DVD Play Simply by starting playback on the D VD player , you can enjoy the D VD playback without setting other switches manually . • When the D VD player is connected thr ough the ana.
49 Operating JVC’ s Audio/V ideo Components Y ou can operate JVC’s audio and video components with this receiver’ s remote control, since control signals for JVC components are preset in the remote control.
50 CD changer After selecting “CDDSC” by pressing CONTR OL repeatedly , you can perform the follo wing operations on a CD changer: 3 PLA Y : Starts playing. 4 : Returns to the beg inning of the current (or pre vious) tr ack. ¢ : Skips to the beg inning of the next track.
51 VCR 1 (VCR connected to the VCR 1 jacks) Y ou can alwa ys perf orm the follo wing opera tions: VCR 1 POWER : T urns on or of f the VCR 1. After pressing VCR 1 (or selecting “VCR 1” by pressing CONTR OL repeatedly), you can perform the following operations on the VCR 1: 1 – 9, 0 : Selects the TV channels on the VCR.
52 Operating Other Manufacturers’ V ideo Equipment Manufacturer Codes JVC 00, 02, 13, 14, 47, 74 AKAI 01, 02 BLAUPUNKT 03, 04, FISHER 01, 05 GRUNDIG 03, 06, 07 HITACHI 08, 09, 10, 49 IRADDIO 02 ITT/.
53 T o change the transmittable signals for operating a CA TV conver ter or DBS tuner 1. Press and hold CA TV/DBS PO WER. 2. Press CA TV/DBS CONTROL. 3 Enter manufacturer’ s code using b uttons 1–9, and 0. See the following lists to f ind the code.
54 T o change the transmittable signals for operating a DVD player 1. Press and hold A UDIO PO WER. 2 Press D VD . 3. Enter manufactur er’s code using b uttons 1–9, and 0.
55 T r oubleshooting Use this char t to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC ser vice center . PROBLEM The display does not light up. No sound from speakers. Sound from one speaker only.
56 SOLUTION 1. Press POWER on the front panel to turn off the receiver. 2. Stop the playback source. 3. Turn on the receiver again, and adjust the volume. Press POWER on the front panel, then check the speaker wiring. If “OVERLOAD” does not disappear, unplug the AC power cord, then plug it back again.
57 Specifications Amplifier Output Po wer: At Stereo operation: Front channels: 120 W per channel, min. RMS, dri v en into 8 Ω , 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. At Surround operation: Front channels: 100 W per channel, min.
58 FM tuner (IHF) T uning Range: 87.5 MHz to 108.0 MHz Usable Sensiti vity: Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensiti vity: Monaural: 21.3 dBf (3.2 µV/75 Ω ) Stereo: 41.3 dBf (31.5 µV/75 Ω ) Signal-to-Noise Ratio (IHF-A weighted): Monaural: 78 dB at 85 dBf Stereo: 73 dB at 85 dBf T otal Harmonic Distor tion: Monaural: 0.
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
LIMITED W ARRANTY AUDIO-2 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below .
VICTOR COMP ANY OF JAP AN , L IMITED EN 0101NHMMDWJEIN J V C RX-8010V[J]COVER_f 01.1.11, 5:56 PM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC rx-8010vbk è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC rx-8010vbk - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC rx-8010vbk imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC rx-8010vbk ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC rx-8010vbk, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC rx-8010vbk.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC rx-8010vbk. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC rx-8010vbk insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
