Manuale d’uso / di manutenzione del prodotto L2020G4 del fabbricante New Leader Battery Industry
Vai alla pagina of 116
IMPORTANT: READ THE SAFETY GUIDELINES AND ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING HIGHWAY EQUIPMENT COMPANY – NEW LEADER DIVISION 1330 76TH AVE SW, CEDAR RAPIDS, IOWA 52404-7052 PH.
.
MODEL L2020G4 UNIT SERIAL NUMBER__________________ MANUAL NUMBER: 97373 - A EFFECTIVE 6 /2006 HIGHWAY EQUIPMENT COMPANY 1330 76 TH AVE SW CEDAR RAPIDS, IOWA 52404 - 7052 PHONE (319) 363 - 8281 FAX (319) 632 - 3081 www .highwayequipment.com BUILDING THE BEST SINCE 1939 Copyright 2003 Highway Equipment Company, Inc.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 2 97373-A Page Rev. A TABLE OF CONTENTS Warranty ................................................................................................... 4 Preface ............
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 3 97373-A Page Rev. A TABLE OF CONTENTS CONTINUED Instructions for Ordering Parts .................................................................... 52 Legend for Parts List Symbols .
INSERT NEW LE A DER (NL) WA RR A NTY.
TA B SA F ETY.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 5 97373-A Page Rev. A PREFACE PLEASE ! ALWAYS THINK SAFETY FIRST !! The purpose of this manual is to familiarize the person (or persons) using this unit with the information necessary to properly install, operate, and maintain this system.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 6 97373-A Page Rev. A SAFETY In this manual and on the safety signs placed on the unit, the words “DANGER,” “WARNI.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 7 97373-A Page Rev. A SAFETY AVOID ACCIDENTS Most accidents, whether they occur in industry, on the farm, at home, or on the highway, are caused by the failure of some individual to follow simple and fundamental safety rules or precautions.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 8 97373-A Page Rev. A SAFETY DECALS MAINTENANCE INSTRUCTIONS 1. Keep safety decals and signs clean and legible at all times. 2. Replace safety decals and signs that are missing or have become illegible.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 9 97373-A Page Rev. A SAFETY DECALS CONTINUED.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 10 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 1. Before attempting to operate this unit, read and be sure you understand the operation and maintenance manual.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 11 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 8. Be careful in getting on and off this unit, especially in wet, icy, snowy or muddy conditions. Clean mud, snow or ice from steps and footwear.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 12 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 14. Starting fluids and sprays are extremely flammable. Don’t smoke. Stay away from flame or heat! 15. All vehicles should be equipped with a serviceable fire extinguisher of 5 BC rating or larger.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 13 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 21. When using metering device, shut off spinner before placing box on hook or when removing it. Handle box with care to avoid injury.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 14 97373-A Page Rev. A GENERAL SAFETY RULES Maintenance Section 1. Maintenance includes all lubrication, inspection, adjustments (other than operational control adjustments such as feedgate openings, conveyor speed, etc.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 15 97373-A Page Rev. A GENERAL SAFETY RULES Maintenance Section 8. If repairs require use of a torch or electric welder, be sure that all flammable and combustible materials are removed.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 16 97373-A Page Rev. A GENERAL SAFETY RULES Installation Section 1. The selection of the vehicle on which a spreader body is to be mounted has important safety aspects. To avoid overloading: a.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 17 97373-A Page Rev. A GENERAL SAFETY RULES Installation Section 5. Do not weld on vehicle frame as such welding can lead to fatigue cracking and must be avoided.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 18 97373-A Page Rev. A NOTES:.
TA B OP & M A INT.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 19 97373-A Page Rev. A GENERAL DESCRIPTION The Model L2020G4 is a hopper-type spreader intended for spreading free-flowing granular agricultural materials, such as chemical fertilizers, agricultural limestone and gypsum.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 20 97373-A Page Rev. A DIMENSIONS & CAPACITIES Dimensions Body Length Overall A Inside B Frame C Cab to Axle or Cab to Tandem CA/CT 10’ (3.05m) 148” (376cm) 120” (305cm) 111” (282cm) 84” (213cm) CA 11’ (3.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 21 97373-A Page Rev. A INSTALLATION INSTRUCTIONS Recommended sequence of installation is: 1. Mounting of PTO and pump drive. 2. Installation of radar (if applicable) 3. Mounting of spreader.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 22 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED 2. Pump PTO Selection: The following chart shows pumps available through Highway Equipment Company ( HECO): HECO Pump Part No.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 23 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED HYDRAULIC PUMP INSTALLATION A mounting bracket for the hydraulic pump is shipped with the spreader.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 24 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED MOUNTING OF SPREADER BODY Truck Frame Length The length from the rear of the cab to the rear end of the frame should be approximately as shown on “Dimensions and Capacities” chart under “C”.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 25 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Positioning Body Using a suitable lifting device, lift empty spreader onto truck frame. Position body centrally with respect to truck frame rails and approximately 4" from rear of cab.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 26 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Figure 3 - Mounting Angle Installation Installing Rear Mounting Angles Position rear mounting angles with the slotted faces against the side of the truck frame and centered on rear cross sill.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 27 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Securing Spreader Body to Frame Install mounting angles and tighten mounting bolts to recommended torque. Weld mounting angles to spreader cross tubes by welding on front, outer and rear sides (Figure 4).
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 28 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED FENDER INSTALLATION Figure 5 - Fender Angle Installation Attach fender angles to spreader body as shown in Figure 5.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 29 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED HYDRAULIC HOSE INSTALLATION Determine the pressure port of the pump. Install the pressure hose into this port as shown in Figure 8.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 30 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Reusable Non-Skive Type Ends Step 1 Cut hose to length required using a fine tooth hacksaw or cut-off machine. Clean hose bore.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 31 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Installation Guide 1. Use elbows and adapters in the installation to relieve strain on the assembly, and to provide easier and neater installations that are accessible for inspection and maintenance.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 32 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED ELECTRICAL CONNECTIONS Connect all electrical control circuits. The supply conductor should be connected to the accessory terminal of the truck ignition switch through the fifteen amp.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 33 97373-A Page Rev. A INITIAL START-UP NOTE: Do not load spreader with material. 1. Check over entire unit to be sure all fasteners are in place and properly tightened per “Fastener Torque Chart” in this manual.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 34 97373-A Page Rev. A FIELD TESTING The following procedure is a guide: 1. Field test over any suitable course which allows vehicle to be driven at speeds to be used while spreading.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 35 97373-A Page Rev. A GENERAL OPERATING PROCEDURES 1. Make sure unit has been properly serviced and is in good operating condition.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 36 97373-A Page Rev. A LUBRICATION & MAINTENANCE PREVENTATIVE MAINTENANCE PAYS! The handling and spreading of commercial fertilizers is a most severe operation with respect to metal corrosion.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 37 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED HYDRAULIC HOSE Hose assemblies in operation should be inspected frequently for leakage, kinking, abrasion, corrosion or any other signs of wear or damage.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 38 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED CONVEYOR CHAIN Hose down unit and remove any material build - up on sprockets and under chain.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 39 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED #4 CONVEYOR BELT Standard belt for the #4 chain has a nylon fabric that is impervious to moisture, weathering or normal action except oil.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 40 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED Adjustment 1. TENSION Belt tension should be just tight enoug h to prevent slippage — no tighter. If the “flats” on the conveyor drive pulley are visible through the belt, tension is high enough.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 41 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED PROBLEM 2: (Figure 12) Belt contacts one side at front and contacts other side at rear. SOLUTION: If adjusting as in Problem 1 does not remedy the situation, adjustment of the drive pulley is nece ssary.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 42 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED If, after continued adjustment, the belt does not track properly, check the following: 1. Check for twisted spreader body.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 43 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED Removal & Replacement Tools and Equipment Required: 1. 1 1/2” Hex Wrench 2. 25 to 30 Feet of 1/4” to 3/8” Rope.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 44 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED 13. Insert a plastic tube in each splice and across the full width of the belt and pull the two ends together at the center of the rear face of the drive pulley.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 45 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED LUBRICATION OF BEARINGS Grease in a bearing acts to prevent excessive wear of parts, protects ball races and balls from corrosion and aids in preventing excessive heat within the bearing.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 46 97373-A Page Rev. A LUBRICANT & HYDRAULIC OIL SPECIFICATIONS HYDRAULIC SYSTEM Use premium quality lubricants with 100-200 SUS or 20-43 cSt viscosity at operating temperatures.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 47 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CHART The spread er should be regularly lubricated with the lubri.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 48 97373-A Page Rev. A TROUBLESHOOTING Symptom : Spinner motors do not turn when spinner control valve is in running position or conveyor does not run in manual mode. See reasons 1, 2, 3, 4, 5, 7, 8 & 9.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 49 97373-A Page Rev. A TROUBLESHOOTING CONTINUED Reason : Correction : 1. Hydraulic oil level low. Add hydraulic oil to reservoir up to “Full” mark. 2. Shut -Off valve on oil reservoir not open.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 50 97373-A Page Rev. A TROUBLESHOOTING CONTINUED Reason : Correction : 14. Defective spinner control valve. Replace valve metering spool spring. If no improvement, replace spinner control valve.
Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 51 97373-A Page Rev. A STANDARD TORQUES NATIONAL COARSE (NC) CAP SCREWS CAP SCREW GRADE IDENTIFICATION - MARKINGS ON HEA.
Please Give Part No., Description and Unit Serial No. 52 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A INSTRUCTIONS FOR ORDERING PARTS Order from the AUTHORIZED DEALER in your area. 1. Always give the pertinent model and serial number of the spreader.
Please Give Part No., Description and Unit Serial No. 53 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MOUNTING ANGLE ITEM PART NO. DESCRIPTION QTY 1 31856 Angle – Mounting 4 2 20131 Cap Screw - 1/2.
Please Give Part No., Description and Unit Serial No. 54 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FEEDGATE AND JACK 1 2 3 4,5 6 7 8,9 10,11 12,13,14 JACK.
Please Give Part No., Description and Unit Serial No. 55 HIGHWAY EQUIPMENT COMPANY 97373 - A Pa ge Rev. A FEEDGATE AND JACK CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 1 2885 36384 36384 .
Please Give Part No., Description and Unit Serial No. 56 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A #5 BOTTOM ITEM PART NO. DESCRIPTION QTY CS SS 53982 53982 #5 Belt Assembly – 10’ Unit 53983 5.
Please Give Part No., Description and Unit Serial No. 57 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A #5 BOTTOM CONTINUED ITEM PART NO. DESCRIPTION QTY CS SS 10 20319 36409 Bolt – Carriage 3/8 x 1 .
Please Give Part No., Description and Unit Serial No. 58 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR IDLER 8 1 11 3 5 2 4 7,10 6 9 12,13,14 12,13,14 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 59 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR DRIVE 11,12 6 1 7,8,9 10 13,14 3,4,5 2 15,16 6 2 3,4,5 7,8,9 1 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 60 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A ENCODER 1 2 3 ITEM PART NO. DESCRIPTION QTY 1 88247 Bracket – Rear Shaft 1 2 56263 Sleeve – Rate Sensor 1 3 86772 Encoder – 180 with Hardware 1 86772-X1 Encoder – 360 with Hardware 1 NOTE: #2, #3 and #4 Conveyors only.
Please Give Part No., Description and Unit Serial No. 61 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR CHAIN OILER 9 1 10 11,12,13 14 3 2 5 8 5 6 14 14 7 4 14 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 62 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A PINTLE CHAIN CONVEYOR 2 4 5 4 5 3 1 2 4 5 4 5 1 #2 – Cross bars every other link #3 – Cross bars every link ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 63 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR CHAIN ITEM PART NO. DESCRIPTION QTY 1 #4 BOC Chain – Conveyor Assembly 97067 10’ Uni.
Please Give Part No., Description and Unit Serial No. 64 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CHAIN SHIELDS C B A ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS Chain Shield – RH #2 & #.
Please Give Part No., Description and Unit Serial No. 65 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CHAIN SHIELDS CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 2 Chain Shield – RH #4 B.
Please Give Part No., Description and Unit Serial No. 66 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FRONT WIPER 1 2 3 4 ITEM PART NO. DESCRIPTION QTY CS 409 304 1 39426 39426 39426 Belt – Front W.
Please Give Part No., Description and Unit Serial No. 67 HIGHWAY EQUIPMENT COMPANY 97373 - A Page Rev. B REAR WIPER - #2 & #3 CONVEYORS 3 2 1 4,5 BOTTOM VIEW DETAIL 1 6,7,8 3 9 11,12,13 5,10 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 68 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS & MUDFLAPS – TRUCK & SEMI-FLOAT TIRES ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 69 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS & MUDFLAPS – TRUCK & SEMI-FLOAT TIRES CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 70 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS – FULL & SUPER FLOATATION TIRES 1 2 4 3 8 9 10 11 6 7 5 3 3 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 71 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS – FULL & SUPER FLOATATION TIRES CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 72 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A INVERTED “V” ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 1 82625 82626 82626 Bar - Adjusting.
Please Give Part No., Description and Unit Serial No. 73 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CAB SHIELD ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 81910 81912 81911 Cab Shield Assembly -.
Please Give Part No., Description and Unit Serial No. 74 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A LADDER ITEM PART NO. DESCRIPTION QTY 46458 Group - Ladder 46460 Group - Ladder for Units with Rai.
Please Give Part No., Description and Unit Serial No. 75 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A HILLSIDE FLOW DIVIDER ITEM PART NO. DESCRIPTION QTY 1 36413 Nut – Hex 5/16 SS 4 2 36419 Washer .
Please Give Part No., Description and Unit Serial No. 76 HIGHWAY EQUIPMENT COMPANY 97373 - A Page Rev. A MATERIAL DIVIDER 2 1 5 4 3 6 8 10 11 7 9 10 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 77 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER GUARD & SHIELDS 14 15 13 4 5 6 8 4 6 8 1 2 3 4 5 7 9 10 11 12 4,5,6,8 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 78 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A 24” HYDRAULIC FANS 1 2 3 4 5 6 7 8 9 10 10 11,13 11,12,14 16,17,18,19 22 21 23 33 31 31 32 37 39,40 34 13 15 11,12,14 24 30 36 35 25 19 28,29 26,27 20 38 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 79 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A 24” HYDRAULIC FANS CONTINUED ITEM PART NO. DESCRIPTION QTY CS SS 7 87170 87170 Jack – Coated .
Please Give Part No., Description and Unit Serial No. 80 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER SENSOR GUARD REMOVED FOR CLARITY 3 4,6,7,8 1 2 5,7,8 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 81 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RESERVOIR 1 2 3 4 7 6 8 9 7 8 5 9 ITEM PART NO. DESCRIPTION QTY CS SS 86484 86484 Reservoir Assem.
Please Give Part No., Description and Unit Serial No. 82 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. B RESERVOIR/PUMP HYDRAULICS ITEM PART NO. DESCRIPTION QTY 1 98520 Tube Assembly for: 10’ Unit 1 9.
Please Give Part No., Description and Unit Serial No. 83 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. B RESERVOIR/PUMP HYDRAULICS CONTINUED ITEM PART NO. DESCRIPTION QTY 3 29803 Adapter - O-ring 1 4 98109 Valve – Relief 3100 PSI 1 5 29840 Adapter - 90 ° Elbow 1 6 81336 Hose - 1” Dia.
Please Give Part No., Description and Unit Serial No. 84 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A TWIN SPINNER HYDRAULICS 1 1 6 2 4 3 9 10 11 9 6 8 9 12 10 9 5 7 PRESSURE FROM CONTROL VALVE RETURN TO TANK 14 13 15 16 ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 85 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – SINGLE PINION ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 86 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – DUAL PINION ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 87 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – DUAL PINION CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 88 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RAVEN CONTROL HYDRAULICS – SINGLE PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.
Please Give Part No., Description and Unit Serial No. 89 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RAVEN CONTROL HYDRAULICS – SINGLE PINION CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 90 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – SINGLE PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.
Please Give Part No., Description and Unit Serial No. 91 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – SINGLE PINION CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 92 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – DUAL PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.
Please Give Part No., Description and Unit Serial No. 93 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – DUAL PINION CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 94 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SINGLE PINION GEAR CASE ITEM PART NO. DESCRIPTION QTY 43501 Gear Case – Assembly Mark series (s.
Please Give Part No., Description and Unit Serial No. 94B HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A GEAR CASE – SINGLE PINION ITEM PART NO. DESCRIPTION QTY 36671 Gear Case – Assembly Single Pi.
Please Give Part No., Description and Unit Serial No. 95 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DUAL PINION GEAR CASE ITEM PART NO. DESCRIPTION QTY 55971 Gear Case – Assembly Mark series (sho.
Please Give Part No., Description and Unit Serial No. 95B HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A GEAR CASE – DUAL PINION ITEM PART NO. DESCRIPTION QTY 37985 Gear Case – Assembly Dual Pinion.
Please Give Part No., Description and Unit Serial No. 96 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER MOTOR ITEM PART NO. DESCRIPTION QTY 23800 Motor Assembly 1 33777 Ring - Retainer 1 2 2848.
Please Give Part No., Description and Unit Serial No. 97 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER MOTOR CONTINUED ITEM PART NO. DESCRIPTION QTY 10 6089 Ring - Snap 1 11 28490 Plate - Shaf.
Please Give Part No., Description and Unit Serial No. 98 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR MOTOR ITEM PART NO. DESCRIPTION QTY 55970 Motor - Hydraulic, 1” 55972 Motor - Hydrauli.
Please Give Part No., Description and Unit Serial No. 99 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR MOTOR CONTINUED ITEM PART NO. DESCRIPTION QTY 6 37385 Race - Bearing 1 7 37401 Bearing -.
Please Give Part No., Description and Unit Serial No. 100 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER CONTROL VALVE ITEM PART NO. DESCRIPTION QTY 32485 Valve - Hydraulic 1 N.
Please Give Part No., Description and Unit Serial No. 101 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A LIGHTS ITEM PART NO. DESCRIPTION QTY 1 6114 Cluster - Light, Red 1 2 20572 Screw - Machine 3/16 .
Please Give Part No., Description and Unit Serial No. 102 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DECALS 3 2 4 8 NEW LEADER 10 9 11 12 17 19 13 14 16 - ON RIGHTHAND SIDE ONLY 7 5 6 1 NEW LEADER .
Please Give Part No., Description and Unit Serial No. 103 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DECALS CONTINUED ITEM PART NO. DESCRIPTION QTY 1 368 Decal - Flying Material 1 2 364 Decal - War.
Please Give Part No., Description and Unit Serial No. 104 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - CONTROL VALVE/GEAR CASE ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 105 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - VALVE.
Please Give Part No., Description and Unit Serial No. 106 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY – VALVE CONTINUED ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 107 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL VALVE ASSEMBLY – VALVE ADAPTER ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 108 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL VALVE ASSEMBLY - IDLER ITEM PART NO.
Please Give Part No., Description and Unit Serial No. 109 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - VALVE BLOCK ITEM PART NO.
TA B G 4 Spread P attern.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il New Leader Battery Industry L2020G4 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del New Leader Battery Industry L2020G4 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso New Leader Battery Industry L2020G4 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul New Leader Battery Industry L2020G4 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il New Leader Battery Industry L2020G4, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del New Leader Battery Industry L2020G4.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il New Leader Battery Industry L2020G4. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo New Leader Battery Industry L2020G4 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
