Manuale d’uso / di manutenzione del prodotto CS 1000X del fabbricante Peavey
Vai alla pagina of 20
.
A Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
A WARNING! For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS! Using one speaker, it must be rated at 2 ohms minimum. Using two speakers, they must be rated each at 4 ohms minimum.
DDTTM ACTIVE LEDs (1) The DDTTM active LEDs indicate when compression is taking place. As long as gain reduction is occurring, the LED will continue to light, thereby giving a valuable indication of this unique compression function.
conditions. Next to each ladder the calibration is “dB below full power.” This is a convenient scale that indicates the amount of power amp headroom left for any signal condition. INPUT SENSITIVITY CONTROLS (4) The CS 1000X features a 31 detent, calibrated sensitivity control for each channel.
Never break off the ground pin on the CS 1000X or any amplifier. The use of extension cords should be avoided, but if essential, always use a three-wire type with at least a #14 AWG wire size. The use of lighter wire will severely limit the power capability of this amplifier.
LOW-Z INPUTS (11) Conventional three-pin, female XLR input jacks are provided, which can be used as either the channel inputs or the crossover inputs, depending upon what has been plugged into the crossover socket (14). Fur- ther, this XLR input is balanced or unbalanced, depending upon what is plugged into the transformer socket (12).
SPEAKER OUTPUTS (18) (19) Two l/4” jacks and 5-way binding post speaker output terminals are provided for each channel, with all the outputs from each channel in parallel. Thus, the loudspeaker connection cables can be terminated with l/4” phone plugs, banana plugs, or stripped wires for use in the binding post terminals.
PORTABLE RACK-MOUNT APPLICATIONS Due to the weight of the CS 1000X, we highly recommend that some additional support be provided at the back panel of the amplifier whenever units are installed in a portable rack-mount configuration. Two l/4-20 allen-head bolts have been provided at the rear of the CS 1000X for this purpose.
signal levels beyond this point will not produce any significant increase in output and may cause distortion problems. MODES OF OPERATION 1. STEREO MODE (UNBALANCED INPUTS) The CS 1000X is shipped from the factory with jumper plugs inserted in the transformer (12) and crossover (14) accessory sockets.
TRANSFORMER /PL-2 MODULE) 3 POSITIVE SENSITIVITY SENSITIVITY TRANSFORMER (PL-7 MODULE) 2 NEGATIVE X-OVER 3 POSITIVE 0 PATCH PANEL (STEREO MODE) WITH BAL. INPUT TRANSFORMER MODULES 3. BIAMP STEREO MODE The Peavey CS-1000X patch panel can also be used to biamp and/or provide special equalization capabili- ties for loudspeaker systems.
each crossover having a balanced input (1 l), dual (parallel) unbalanced inputs (13), an unbalanced low output (15), and an unbalanced high output (16). In order to complete the system, external patching must be accomplished between the low and high crossover outputs and the various power amp inputs using shielded patch cords.
associated loudspeaker components. To help prevent this, whenever the bridge mode is selected, the standby (“0”) LED and the LED array itself on Channel B is defeated (off), just as if there was some kind of a fault condition present on Channel B.
Often studio engineers feel the need to defeat the DDT compressor, for fear it might color the sound in studio listening. The DDT compressor is only activated when clipping is imminent.
The term headroom deserves some consideration. Program material (music or speech) is made up of many different frequencies and their harmonics. Most music, especially contemporary rock music, is bass-heavy. That is, the low-frequency material contains much more energy than the high-frequency material.
5. unbalanced), the crossover input jacks (13) can be used to patch out full-range signals to other amplifier/speaker systems that are operating in full range or other biamped systems that require different crossovers. Care must be taken never to remove or replace a crossover module with the CS 1000X power switch on.
3. 4. 5. shorted across itself. Remember, just as in the stereo mode, the power LED array (Channel A) should reach 100% indication before the DDT system is activated on both channels. The jumper plug in the transformer accessory socket (12) of channel A island can be replaced with a PL-2 transformer module.
CS-1 000X PATCH DIAGRAMS Channel A Speakers Channel A (ShIelded) Channel A Speakers Stereo Mode Channel B (ShIelded) PATCH DIAGRAM 1 Stereo Operation Unbalanced High 2 Inputs (Typical Home Stereo) Cha.
THIS LIMITED WARRANTY VALID ONLY WHEN PURCHASED AND REGISTERED IN THE UNITED STATES OR CANADA. ALL EXPORTED PRODUCTS ARE SUBJECT TO WARRANTY AND SERVICES TO BE SPECIFIED AND PROVIDED BY THE AUTHORIZED DISTRIBUTOR FOR EACH COUNTRY. Ces clauses de garantie ne sont vaiables qu’aux Etats-Unis et au Canada.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products. basic cautions should always be followed, including the following. I. Read all safety and operatin g instructions before using this product. 7 &. All safety and operating instructions should be rctaincd for future rcfcrcncc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Peavey CS 1000X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Peavey CS 1000X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Peavey CS 1000X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Peavey CS 1000X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Peavey CS 1000X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Peavey CS 1000X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Peavey CS 1000X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Peavey CS 1000X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.