Manuale d’uso / di manutenzione del prodotto CW28V55V del fabbricante Samsung
Vai alla pagina of 40
COLOUR TELEVISION Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. ENG REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION ELECT.
2 ENG Safety Instructions The following illustrations represent the precautions to be taken when using and moving your television. 5 ° 10% H H 35 ° 75% THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Caution ☛ Main voltage : 220V-240V~, 50Hz (or Indicated on the rear of the TV set).
3 ENG Contents ◆ PREPARING YOUR TELEVISION ■ Safety Instructions ............................................................................................................ .. 2 ■ Caution ........................................................
4 ENG Front Panel Controls TV/VIDEO SELECTION MENU DISPLAY VOLUME ADJUSTMENT CHANNEL SELECTION POWER STAND-BY/TIMER INDICATOR REMOTE CONTROL SENSOR ➣ These figures show typical panels. The actual configuration on your TV may be different, depending on your model.
5 ENG Connection Panels HEADPHONE JACK Side of TV Rear of TV RCA AUDIO/VIDEO INPUT CONNECTORS SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTORS 75 Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK ➣ These figures show typical connector-jack panels. The actual configuration on your TV may be different, depending on your model.
6 ENG Infrared Remote Control ➣ Operation of remote control may be affected by bright artificial light near to the TV set. POWER PICTURE MENU DISPLAY AUTOMATIC SWITCH-OFF/ TELETEXT STORE STILL PICTU.
7 ENG You must insert or replace the batteries in the remote control when you : ◆ Purchase the television. ◆ Find that the remote control is no longer operating correctly. 1 Remove the cover of the remote control by pressing the symbol ( ) and pulling the cover in the direction of the arrow.
8 ENG The mains lead is attached to the rear of the television. ☛ If you have purchased this television in the United Kingdom, refer to rear cover for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. ➢ Use a wall socket with a voltage of between 220 and 240 Volts.
9 ENG Plug & Play Feature Plug & Play Ant. Input Check Select Exit Select Adjust Exit Auto store Country : Others Search : -/+ When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
10 ENG Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “ Function ” and press the + or – button.
11 ENG You can scan the frequency ranges available on your television and in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels.
12 ENG When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found. ◆ The number by which you wish to identify each stored channel. 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “ Channel ” and press the + or – button.
13 ENG 6 If you... Press the... Know the number ◆▲ or ▼ button to select the “ Channel ” . of the channel ◆ + or – button to indicate the required to be stored number. Do not know the ◆▲ or ▼ button to select the “ Search ” . channel numbers ◆ + or – button to start the search.
14 ENG If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required. 1 Press the MENU button.
15 ENG You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
16 ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine- tune the channel manually. 1 Press the MENU button.
17 ENG You can exchange the numbers of two channels, in order to: ◆ Modify the numeric order in which the channels have been automatically stored. ◆ Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU button.
18 ENG Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: ◆ Custom, Standard, Sports, Natural, Mild. 1 Press the MENU button.
19 ENG Adjusting the Picture Settings Your television has several settings which allow you to control picture quality: ◆ Colour tone, Contrast, Brightness, Sharpness, Colour, Tint (NTSC only) 1 Press the MENU button. Result: The “ Picture ” menu is displayed.
20 ENG Using the T ilt Control Feature (Option) If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting. 1 Press the MENU button. Result: The “ Picture ” menu is displayed. 2 Press the + or – button.
21 ENG Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: ◆ Custom, Standard, Music, Movie, Speech. 1 Press the MENU button.
22 ENG Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the “ Sound ” and press the + or – button. 3 Press the ▲ or ▼ button to select the “ Equalizer ” .
23 ENG Extra Sound Settings (depending on the model) Select Enter Exit Sound Mode Custom Equalizer Auto volume : Off Melody : Off Pseudo stereo : Off The following sound settings can be adjusted to suit your personal preferences.
24 ENG The “ I-II ” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “ Dual- I ” or “ STEREO ” , depending on the current transmission.
25 ENG Switching the Sound Off T emporarily You can switch the sound off temporarily, for example you may wish to answer the telephone. 1 Press the “” button.
26 ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the " " button. 1 Press the “” button on the remote control. Result: If the sleep timer is...
27 ENG You can set the television ’ s clock so that the current time is displayed when you press the " " button. You must also set the time if you wish to use the automatic On/Off timers. ➣ The clock setting will be re-activated when pressing the “” (ON/OFF) button on the front panel.
28 ENG You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➣ The first step is to set the television ’ s clock (refer to “ Setting and Displaying the Current Time ” on the previous page).
29 ENG If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “ Blue screen ” mode to “ Off ” . 1 Press the MENU button.
30 ENG Most television channels carry “ teletext, ” pages of written information that provide information such as: ◆ Television programme times ◆ News bulletins ◆ Weather forecasts ◆ Sports results ◆ Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part Contents A Selected page number.
31 ENG You can display teletext information at any time, but signal reception must be good. Otherwise: ◆ Information may be missing ◆ Some pages may not be displayed To activate the teletext mode and display the contents page: 1 Using the ▲ ( ) or ▼ ( ) button, select the channel providing the teletext service.
32 ENG Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
33 ENG Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. 2 Press the colored button corresponding to the page that will be replaced. 3 Enter the new page number using the numeric buttons.
34 ENG Connecting to the A V -1 or 2 SCAR T Input/Outputs ➢ AV-1 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR.
35 ENG Connecting to the RCA Input (A V2) ➢ The RCA (video + audio L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.
36 ENG You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room. 1 Plug a set of headphones into the 3.5 mm mini-jack socket on the side or front of the television (depending on the model).
37 ENG A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually. If you move the television to a different position and color patches appear.
38 ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. ◆ Check that the mains lead has been connected to a wall socket.
39 ENG Memo.
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung CW28V55V è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung CW28V55V - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung CW28V55V imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung CW28V55V ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung CW28V55V, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung CW28V55V.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung CW28V55V. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung CW28V55V insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
