Manuale d’uso / di manutenzione del prodotto CycloneForce Cilinder VC15F50HDTR del fabbricante Samsung
Vai alla pagina of 26
English V acuum Cleaner user manual imagine the possibilities Thank you for purchasing a Samsung pr oduct. SC07F50 series SC15F50 series SC21F50 series ✻ Before operating this unit, please r ead the instructions carefully. ✻ For indoor use only. DJ68-00699B(EN-UK)-08.
02_ safety information safety information SAFETY INFORMA TION WARNING • Before operating the appliance, please r ead this manual thoroughly and r etain it for your refer ence.
safety information _03 safety information IMPORT ANT SAFEGUARDS GENERAL • Read all instructions carefully. Befor e switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner .
04_ safety information capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
safety information _05 • If the transparent window is br oken and the UV rays are exposed directly, turn the power off and contact the service center . • Do not use the UV Brush for purposes other than the sterilization of mattresses, bedclothes, beds, cushions and so on made fr om material.
06_ contents contents ASSEMBLING THE CLEANER 07 OPERA TING THE CLEANER 08 08 Power cord 08 Power control 10 Using the UV brush(SC15F50U, SC21F50U Series) 11 Using the Dust Sensor (Option) FIL TER AND .
assembling the cleaner _07 01 ASSEMBLING THE CLEANER • Please do not press the button of dust bin handle when carrying machine. • For storage, park the floor nozzle.
08_ operating the cleaner POWER CORD CAUTION • When removing the plug fr om the electrical outlet, grasp the plug, not the cord. POWER CONTROL Radio frequency r emote-control (SC07F50H, SC15F50H, SC21F50H, SC15F50U, SC21F50U Series) HOSE (SC07F50H, SC15F50H, SC21F50H Series) 1.
operating the cleaner _09 02 OPERA TING THE CLEANER HOSE (SC15F50U, SC21F50U Series) 1. ON/OFF [ ] Button - Press the [ ] button to operate the vacuum cleaner . Press again to stop the vacuum cleaner . 2. [SUCTION (-/+)] Button - Press the [SUCTION (-/+)] button to incr ease or decrease the suction power .
10_ operating the cleaner Body-control type (SC07F50V , SC15F50V , SC21F50V Series) - HOSE T o reduce suction for leaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open - BODY T o control power level, just slide the power control up and down.
operating the cleaner _11 02 OPERA TING THE CLEANER USING THE DUST SENSOR (OPTION) Dust Sensor Operations • Indicates the amount of sucked in dust so that users can experience the successful operation of the product while cleaning the r oom.
12_ operating the cleaner Cleaning the dust sensor (Option) • Since the dust sensor consists of sensitive electronic devices, if water or other liquids enters the sensor , it may cause a pr oblem.
filter and tool maintenance _13 03 FIL TER AND TOOL MAINTENANCE USING ACCESSOR Y Pipe • Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • T o check for blockages, separate the telescopic pipe and adjust to shorten.
14_ filter and tool maintenance Accessories (SC15F50U, SC21F50U Series) • Push the accessory onto the end of the hose handle. • Pull out the dusting brush to use the crevice tool. • Push the accessory onto the end of the pipe. • Pull out the dusting brush to use the crevice tool.
filter and tool maintenance _15 03 FIL TER AND TOOL MAINTENANCE MAINT AIN FLOOR TOOLS 2-Step Brush • Adjust the inlet lever according to the floor surface.
16_ filter and tool maintenance Mini turbo brush (Option) - T o r eplace brush-roller 1. If a clog is present or debris is visible, unscrew the two screws on the back of the Mini turbo brush to remove the faceplate and clear any obstructions. 2. Inspect condition of brush-roller .
filter and tool maintenance _17 03 FIL TER AND TOOL MAINTENANCE T o r emove dust from the dust bin of the UV brush (SC15F50U, SC21F50U Series) When you notice that the dust bin is filled, use the [Dust Removal] button to empty the dust bin. 1. T o remove dust fr om the dust bin, move the [Dust Removal] button to the “Open” position.
18_ filter and tool maintenance CLEANING THE DUST SENSOR (OPTION) If the green light is not lit while cleaning • Check if the hose, extension pipe or the air inlet is clogged and clean it if necessary. • Empty the dust bin of the cleaner or clean the filters.
filter and tool maintenance _19 03 FIL TER AND TOOL MAINTENANCE EMPTYING THE DUST BIN 1 2 Once dust reaches the dust full mark, empty the dust bin. T ake the dust bin out by pushing the button. Separate the dust bin cover by twisting counter clockwise and pulling the lid.
20_ filter and tool maintenance CLEANING THE DUST FIL TER When to clean the dust filter • The lamp will turn red when suction is reduced. If the light comes on, please clean the dust filter .
filter and tool maintenance _21 03 FIL TER AND TOOL MAINTENANCE CLEANING THE DUST FIL TER Make sure the filter is completely dry befor e putting it back into the vacuum cleaner . Allow 12 hours for it to dry. T ake the dust bin out. Pull the dust bin cover to open.
22_ filter and tool maintenance CLEANING THE OUTLET FIL TER • When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the outlet filter . Note. Do not wash filter . If cleaning does not resolve the pr oblem Please replace blocked out filter .
troubleshooting _23 04 TROUBLESHOOTING troubleshooting PROBLEM SOLUTION Motor does not start. • Check cable, plug and socket. • Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. Low or decreasing suction. • Please check filter and, if required, clean as illustrated in the instructions.
Product fiche [English] According to Commission Regulation (EU) No 665/2013 and No 666/2013 A Supplier Samsung Electronics., Co. Ltd B Model SC15F50HT SC15F50HU SC15F50UW SC15F50V3 SC07F50HV SC07F50H.
memo DJ68-00699B(EN-UK)-08.indd 25 2014. 11. 10. �� 11:47.
DJ68-00699B-08 COUNTR Y CUSTOMER CARE CENTER WEB SITE U.K 0330 SAMSUNG (7267864) www .samsung.com SOUTH AFRICA 0860 7267864 (SAMSUNG) www .samsung.com If you have any questions or comments relating to Samsung pr oducts, please contact the SAMSUNG customer care center .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Samsung CycloneForce Cilinder VC15F50HDTR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Samsung CycloneForce Cilinder VC15F50HDTR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Samsung CycloneForce Cilinder VC15F50HDTR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Samsung CycloneForce Cilinder VC15F50HDTR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Samsung CycloneForce Cilinder VC15F50HDTR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Samsung CycloneForce Cilinder VC15F50HDTR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Samsung CycloneForce Cilinder VC15F50HDTR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Samsung CycloneForce Cilinder VC15F50HDTR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
