Manuale d’uso / di manutenzione del prodotto SR554 del fabbricante SRS Labs
Vai alla pagina of 16
Model SR554 Transformer Preamplifier.
.
Model SR554 Transformer Preamplifier 1290-D Reamwood Avenue Sunnyvale, California 94089 Phone: (408) 744-9040 • Fax: (408) 744-90 49 email: info@thinkSRS.
.
1 SR554 SPECIFICATIONS Inputs Single ended or differential Input Impedance 0.5 Ω Maximum Inputs Transformer and Buffer: 14.0 mV RMS (±20 mV peak) Transformer only: 350 mV RMS (±0.
2.
3 OPERATION The SR554 Transformer Preamplifier is designed to be used with all SRS Lock-in amplifiers. It can reduce input noise of a lock-in amplifier dramatically (as low as 100 pV/ √ Hz) and extends the lock-in’s full scale sensitivity (without expand).
4 1.6 µ F. The real portion of the input impedance (0.5 Ω ) determines the noise performance. See page 7 for detailed information on input impedance. The input can be floated up to ±100 VDC with respect to the chassis. The maximum AC input before overload is 14 mV RMS (±20 mV peak) when the unit is in the buffered mode.
5 the differential mode. In differential operation the (A) and (B) center conductors carry the signal and shielded preamp ground, and the shields are tied to the SR554 chassis. The (A) and (B) cables should be twisted together to prevent inductive pick-up.
6 EXTRA LOW NOISE MEASUREM ENTS When making extremely low noise measurements, it is a good practice to connect the grounding plug of the SR554 to a ground point near the experiment.
7 USING THE SR554 WITHOUT AN SRS LOCK-IN The SR554 can be powered with an external power supply. Power is applied through the 9 pin connector as described below. PIN VOLTAGE CURRENT 1 +20 V 100 mA 6 -20 V 100 mA 7,8 Ground Both voltages are required. Pins 7 and 8 should be tied together and grounded.
8.
9 PERFORMANCE TESTS Performance tests are designed to verify that the unit is performing within the specifications. Necessary Equipment: 1. Lock-In Amplifier Freq Range 0.1 Hz - 100 kHz Output Ampl 4 mV rms - 1 Vrms Output Z 50 Ω Recommended SRS SR850/830/810 2.
10.
Part List 11 Ref. SRS part Value Description C 101 5-00254-501 130P Capacitor, Ceramic Di sc, 50V, 10%, SL C 102 5-00023-529 .1U Cap, Monolythic Ceramic, 50V, 20%, Z5U C 103 5-00023-529 .1U Cap, Monolythic Ceramic, 50V, 20%, Z5U C 104 5-00005-501 150P Capacitor, Ceramic Di sc, 50V, 10%, SL C 105 5-00023-529 .
Part List 12 Ref. SRS part Value Description Z 0 0-00043-011 4-40 KEP Nut, Kep Z 0 0-00079-031 4-40X3/16 M/F Standoff Z 0 0-00089-033 4" Tie Z 0 0-00128-053 4" #24 Wire #24 UL1007 Strip 1/4x.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il SRS Labs SR554 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del SRS Labs SR554 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso SRS Labs SR554 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul SRS Labs SR554 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il SRS Labs SR554, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del SRS Labs SR554.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il SRS Labs SR554. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo SRS Labs SR554 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.