Manuale d’uso / di manutenzione del prodotto 7000 del fabbricante TANDBERG
Vai alla pagina of 125
1 Software version E2 D13099-02 This document is not to be reproduced in whole or in part without permission in writing from: User Manual.
2 T ANDBERG Videoconferencing System LCD MONITORS: Panel sticking and af ter-image lag A void displaying the same images continuously over a long period of time on the T ANDBERG 7000 monitors. Displaying the same images such as still images for a long time may cause after-image lagging.
T ANDBERG Videoconferencing System 3 Environmental Issues Thank you for buying a product which contributes to a reduction in pollution and thereby helps save the environment. Our products reduce the need for travel and transport and thereby reduce pollution.
4 T ANDBERG Videoconferencing System Operator Safety Summary For your protection, please read these safety instructions completely before operating the equipment and keep this manual for future reference. The information in this summary is intended for operators.
T ANDBERG Videoconferencing System 5 Content s Introduction ........................................................................................ 7 Menu structure ................................................................................... 8 T ANDBERG 7000 Videoconferencing System .
6 T ANDBERG Videoconferencing System Advanced use .................................................................................. 49 Main menu ..................................................................................................... 49 Call quality .
T ANDBERG Videoconferencing System 7 Introduction This User Manual is provided to help you make the best use of your T ANDBERG system. The T ANDBERG system offers superior audio and video quality in a fully-featured unit. Main Features: • Supports videoconferencing via both IP and ISDN networks.
8 T ANDBERG Videoconferencing System Menu structure The on-screen menu structure is shown below . Press the M ENU key on the remote control to enter or leave the Main Menu.
T ANDBERG Videoconferencing System 9 T ANDBERG 7000 V ideoconferencing System At a glance — the T ANDBERG 7000 system Microphone NAM II (Natural A udio Module) Column Base F oot 2 x 30'' L.
10 T ANDBERG Videoconferencing System W .A.V .E. II Camera The Main Camera is mounted on top of the monitor . The Main Camera includes a high quality color camera with a fast pan/tilt/zoom action. The Main Camera is controlled by the system’s infra-red remote control and operates pan/tilt, focus and zoom.
T ANDBERG Videoconferencing System 11 Remote control The remote control is used to control all functions of the system. If the screen saver is activated (black monitor), touching the remote control will automatically wake up the system.
12 T ANDBERG Videoconferencing System T able microphone The high quality table microphone is specially designed to be used on a table during a video conference. The ideal location for the microphone is on a flat surface at least 2m (6.5 ft) from the front of the system.
T ANDBERG Videoconferencing System 13 Installation Precautions • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
14 T ANDBERG Videoconferencing System Installation Unpacking and mounting of the base ( Column and Foot) Place the column with the bolts into the bolt holes on the foot as shown in Figure 2.
T ANDBERG Videoconferencing System 15 Installation Unpacking and installing the monitor frame Lift the monitor frame out of the transport case. D O NOT REMOVE THE PROTECTIVE PLASTIC FILM FROM THE MONIT OR FRONT BEFORE THE MONITOR FRAME IS SECUREL Y F ASTENED TO THE BASE .
16 T ANDBERG Videoconferencing System Installation Connecting cables 1. Power cable Connect the system power cable to the correct country variant of the power cable. Connect this cable to an electrical distribution socket. 2. Microphone cable Connect the microphone cable to the microphone.
T ANDBERG Videoconferencing System 17 Installation NOTE 6. LAN cable • T o use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN. 5a. ISDN cables - using BRI interface Connect the ISDN cables to the ISDN sockets (S/T -interface) provided by the service provider .
18 T ANDBERG Videoconferencing System Installation Figure 7 Figure 8 When everything is mounted correctly , the T ANDBERG 7000 should look like shown in Figure 8. Monitor back cover Make sure that all cables are connected and then lead them down through the cable duct on the back side of the column.
T ANDBERG Videoconferencing System 19 Installation System configuration • Switch the system on by connecting the power cable to an electrical distribution socket. • After the system has performed a self-test routine, product logo and a ‘Welcome’ menu will be displayed on the monitor .
20 T ANDBERG Videoconferencing System Installation ISDN configuration For each installation of the system it is necessary to configure the unit. All configuration parameters are available via the menu system. If you are using an external IMUX or special networks, the external equipment may also need to be configured.
T ANDBERG Videoconferencing System 21 Installation LAN configuration • Press M ENU on the remote control. Select the menu ‘ T erminal Settings ’, then ‘ LAN Settings ’ . S pecify the necessary LAN settings according to the instructions from your LAN administrator .
22 T ANDBERG Videoconferencing System Getting started Getting st arted System st art-up Y our system should be in standby mode. When in standby mode, pressing any key or picking up the remote control will wake up the system. An incoming call will also wake up the system.
T ANDBERG Videoconferencing System 23 Getting started Basics The system’s most commonly used functions are accessible directly from the remote control by single key presses.
24 T ANDBERG Videoconferencing System Getting started Making and ending calls Making a call T o make a call, enter the number or the IP-address of the unit you wish to call using the Dialing keys and press C ONNECT . ISDN call The system will, by default, try to connect using Quality: Auto (see table overleaf).
T ANDBERG Videoconferencing System 25 Getting started TIP Access Code If the system requires an Access Code, enter the code and press OK to proceed making a call: Using sub-address / extension address.
26 T ANDBERG Videoconferencing System Getting started TIP Selecting / setting default quality (bandwidth) T YPE OF CALLS Auto 384kbps on ISDN/768kbps on IP Max * 768kbps on ISDN-BRI * 1472/1920kbps (2.
T ANDBERG Videoconferencing System 27 Getting started Selecting / setting default network T o select a specific network, press the ‘ Net ’ Quick Key when you are in the Dial menu: 1 Highlight the network to be used in your call.
28 T ANDBERG Videoconferencing System Getting started Answer a call T o answer a call, press C ONNECT . Manual answer of a call is needed if the autoanswer facility is switched off. See ‘ Utilities ’ i n ‘ Advanced use ’ . End a call T o end a call, press D ISCONNECT .
T ANDBERG Videoconferencing System 29 Getting started T o find an entry , key in the first letter , for example T , and scroll with the up/down arrows. T HE LEFT / RIGHT ARROWS WILL MOVE ONE P AGE UP / DOWN . T o dial the selected entry press C ONNECT .
30 T ANDBERG Videoconferencing System Getting started Add New Entry When selecting ‘ Add New Entry ’, an empty directory entry is displayed: 1 Move to ‘ Name ’ and enter characters using the number keys on your remote control (as on mobile phones).
T ANDBERG Videoconferencing System 31 Getting started Add MultiSite Entry When selecting ‘ MultiSite Entry ’, an empty MultiSite directory entry is displayed: 1 Move to ‘ Name ’ and enter the MultiSite meeting name. 2 Select ‘ Add Site ’ to add meeting members by searching for point-to-point entries in the directory list.
32 T ANDBERG Videoconferencing System General use mov e pip General use Adjusting volume Press the V OLUME keys to adjust the volume level. An on-screen indicator will show the current level. View outgoing video (selfview) Press the S ELFVIEW key to view your outgoing video.
T ANDBERG Videoconferencing System 33 General use On Screen Symbols The system has a number of symbols signalling different settings. This symbol will be shown when the volume is turned off on the system. This symbol will be shown when the microphone is muted/turned off.
34 T ANDBERG Videoconferencing System General use Do Not Disturb / Sleep Mode Press any Quick key when not in a call to activate the Quick Menu. When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy tone when calling this unit.
T ANDBERG Videoconferencing System 35 General use Selecting video sources Press: to select the video source to be transmitted to the far end. doc cam main cam vcr pc aux OK zoom Controlling the Main Camera Moving / zooming camera T o control the Main Camera use the keys below: for pan/tilt and for zo oming.
36 T ANDBERG Videoconferencing System General use V oice Activated Camera Positioning Through V oice Activated Camera Positioning and the use of two or three microphones, the camera will automatically view the current speaker .
T ANDBERG Videoconferencing System 37 General use Preset s The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store: • Video source • Camera position, .
38 T ANDBERG Videoconferencing System General use OK Far end camera control (FECC) Press the F AR E ND key until the ‘ FarEndCamera ’ on-screen indicator is displayed. For this feature to operate the far end must support ‘Far end camera control’ (H.
T ANDBERG Videoconferencing System 39 General use Sending and receiving snap shot s When a snapshot is sent, received or requested, it will be stored in the graphics memory . When a new image is sent or received, the old image will be erased. When disconnecting the call, the image will be erased.
40 T ANDBERG Videoconferencing System General use Duo Video Duo Video is useful if you want to display live video from your document camera or another camera in addition to live video of yourself. Add Duo Video • Alt.1: Press any other video source than MainCam during a call.
T ANDBERG Videoconferencing System 41 General use End a Duo Video call T o end a Duo Video call, press D ISCONNECT . Select if you want to disconnect only the Duo Video connection or the whole connection. disconnect Controlling camera, changing video source, presets in a Duo Video call The main monitor will always display incoming video.
42 T ANDBERG Videoconferencing System General use MultiSite (MCU) The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile).
T ANDBERG Videoconferencing System 43 General use MultiSite cascading By connecting four MultiSite systems together , it is possible to connect up to 10 video sites (including the four MultiSite sites) plus 4 audio sites (telephones), see drawing below .
44 T ANDBERG Videoconferencing System General use • Press ‘ Add Site ’ to bring up the MultiSite dial menu. • Enter the number to call. The Quality will, by default, be the same as used by the first call. T o place a telephone call instead of a video call, press ‘ Quality ’ and select ‘ T eleph ’ in the Quality menu.
T ANDBERG Videoconferencing System 45 General use Disconnecting sites from a conference T o disconnect a site or end the conference, press D ISCONNECT . • Select site and press O K or ‘ Disconnect Site ’. T o end the meeting press ‘ Disconnect All ’.
46 T ANDBERG Videoconferencing System General use PC Presenter Plugging a PC into the system is made extremely simple through the PC Presenter , avoiding the need for any additional hardware such as a projector , PC/Video converter or extra cables. • Connect the pre-connected VGA cable to your PC (VGA Output).
T ANDBERG Videoconferencing System 47 General use Web-interface It is possible to access and maintain the system remotely via a local area network (LAN) using a standard Web- browser .
48 T ANDBERG Videoconferencing System General use Streaming T o view streaming, select ‘S treaming’ from the W eb-page of the codec. See separate ‘S treaming’ section in this manual for further information. T ext Chat / Closed Captioning While in an ISDN or IP call to another system supporting T ext Chat (T .
T ANDBERG Videoconferencing System 49 Advanced use Main menu The menu system can be used to select available functions and utilities for the system. T o enter the menu system and the main menu, press the M ENU key . Y ou may leave the menu system at any time by pressing the M ENU key .
50 T ANDBERG Videoconferencing System Advanced use Call quality The Call Quality menu allows you to select the preferred quality of your call. D UE TO ACTIONS OR LIMIT A TIONS AT THE FAR END YOU MA Y NOT AL W A YS BE ABLE TO ACHIEVE THE SELECTIONS YOU WANT .
T ANDBERG Videoconferencing System 51 Advanced use Advanced call quality NOTE T HE ‘A UTO ’ SETTINGS ARE RECOMMENDED CHOICES FOR MOST CASES . T HE OTHER AUDIO , VIDEO AND RESOLUTION SELECTIONS MADE IN THIS MENU WILL OVERRIDE THE SELECTIONS MADE IN THE ‘C ALL Q UALITY ’ MENU AND ARE NOT RECOMMENDED TO BE CHANGED FOR NORMAL USE .
52 T ANDBERG Videoconferencing System Advanced use Present ations Presentation Mode T o send a snapshot immediately af ter pressing S NAPSHOT select ‘ Presentation Mode: Normal ’. T o preview the image before it is transferred as a snapshot, select ‘ Present ation Mode: Preview ’.
T ANDBERG Videoconferencing System 53 Advanced use * - Requires option ‘Presenter’. T o check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’. Duo Video Number* Auto When adding Duo Video in a conference, Duo Video is connected automatically if supported by the far end.
54 T ANDBERG Videoconferencing System Advanced use Utilities Autoanswer On : The system will automatically answer all incoming calls. On+MicOff : The system will automatically answer all incoming calls and switch the microphone off when the call is connected.
T ANDBERG Videoconferencing System 55 Advanced use Auto-PIP On : Y our selfview will automatically be displayed as a PIP (Picture-In-Picture) whenever the camera position or video source is changed. Picking up the remote control will also display your selfview .
56 T ANDBERG Videoconferencing System Advanced use Menu Password Enter the code whch should be entered to get access to the menu system on the T ANDBERG system. When pressing the ‘ Menu ’ button on the remote control, the user will be asked to enter the Password written here.
T ANDBERG Videoconferencing System 57 Advanced use MCU services A Multipoint Control Unit (MCU) enables several sites to participate in the same conference. An MCU conference can have different modes: V oice Switched means that the image of the person currently speaking will be broadcast to all the other conference participants.
58 T ANDBERG Videoconferencing System Advanced use Quick Menu When connected to an MCU P RESS ANY Q UICK KEY WHEN IN A MUL TIPOINT CONFERENCE TO ACTIV ATE THE Q UICK M ENU . This menu provides access to the most commonly used MCU functions. If ‘ Request Floor ’ is selected, ‘Request Floor’ will change to ‘Release Floor’.
T ANDBERG Videoconferencing System 59 Advanced use Request floor When requesting the floor , the MCU will broadcast your video in full screen to all other particip ants in the conference. If the MCU conference has a chairman, a floor request is sent to the chairman.
60 T ANDBERG Videoconferencing System Advanced use Chair control * Y ou select ‘ Chair Control ’ and ‘ T ake Chair ’ to assume the role of chairman of the ‘meeting’. As chairman, you may control which site you and the other sites see. T ake chair Allows you to request chairmanship of the conference.
T ANDBERG Videoconferencing System 61 Advanced use Audio Settings Audio Inputs By default, all input s are enabled. Just plug in an audio source and it is active. Audio input s that are On will automatically be mixed. Select Off to prevent audio/noise from unused inputs or if you want to disable a specific input.
62 T ANDBERG Videoconferencing System Advanced use As there is no acoustic echo canceller on this input it should not be connected to any microphones. The audio source connected to this input will be heard from the local speaker . Audio input 6 is intended for connection to a VCR.
T ANDBERG Videoconferencing System 63 Advanced use Audio Outputs Audio out 1 is intended for connection to T ANDBERG Natural Audio, televisions or audio amplifiers. Audio out 2 is intended for connection to audio recording equipment or to a telephone add-on hybrid.
64 T ANDBERG Videoconferencing System Advanced use Echo Control Each of the 3 microphone inputs and Audio input 4 have a sep arate echo canceller . One echo canceller per input provides more sophisticated control than having one common canceller for all microphones.
T ANDBERG Videoconferencing System 65 Advanced use Room Size This setting allows optimization of the echo canceller to the acoustic size of the room. Hard walls, many windows etc. might require higher settings than expected. Carpets, curt ains etc. might require lower settings.
66 T ANDBERG Videoconferencing System Advanced use Automatic Gain Control (AGC) Settings Select ‘ On ’ to allow automatic adjustments (Automatic Gain Control) of audio levels. When ‘ On ’, the AGC maintains the audio signal level at a fixed value by attenuating strong signals and amplifying weak signals.
T ANDBERG Videoconferencing System 67 Advanced use Alert T ones & V olume T o help distinguish between incoming video calls and ordinary telephone calls, different ringing tones may be selected. Y ou may also select different volume levels for the ringing tone.
68 T ANDBERG Videoconferencing System Advanced use Video Settings Camera T racking Mode Select the camera tracking mode: Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle images are preferred over close-up images.
T ANDBERG Videoconferencing System 69 Advanced use Focus T o manually adjust the focus select ‘ Manual ’ and use the arrow keys to adjust. Camera Brightness T o manually adjust the brightness select ‘ Manual ’ and use the arrow keys to adjust.
70 T ANDBERG Videoconferencing System Advanced use Video Name As a default each video input corresponds to the name used on the remote control. T o edit the name, use the number keys on the remote control.
T ANDBERG Videoconferencing System 71 Advanced use VGA Settings VGA Out T o enhance the local video quality , a VGA monitor may be connected. Main : Should be used if you want to use a VGA monitor as your main monitor . V ideo outputs 1 and 3 will be disabled.
72 T ANDBERG Videoconferencing System Advanced use Address The IP-address of the PC with the VNC software inst alled. T o find the IP-address of the PC, select ‘Command Prompt’ from the St artup-menu. T ype ‘ipconfig’ and press ENTER. Display Number The display number for VNC is 0 and upwards.
T ANDBERG Videoconferencing System 73 Advanced use T erminal Settings This menu provides basic network setup for the unit and should be used when installing the system. Network Configuration Before using the system it is necessary to specify which network to use and define its settings.
74 T ANDBERG Videoconferencing System Advanced use If you want to use your system via Leased E1/T1, you should select ‘ Current Network: Leased E1/T1 ’ and enter the ‘ Leased E1/T1 Settings ’ menu to set the Leased E1/T1 parameters.
T ANDBERG Videoconferencing System 75 Advanced use ISDN-BRI Settings M ANDA TO RY ISDN-BRI SETTINGS T O MAKE SURE YOUR SYSTEM WILL WORK PROPERL Y USING ISDN-BRI, MAKE THE FOLLOWING SETTINGS : - S ET I.
76 T ANDBERG Videoconferencing System Advanced use Line setup This menu allows you to program the numbers associated with your ISDN line. If you want to use this ISDN line, you need to set ‘ Enabled: On ’ and enter the numbers of your ISDN line. If some of the ISDN lines are not to be used, set ‘ Enabled: Off ’.
T ANDBERG Videoconferencing System 77 Advanced use Advanced ISDN settings Subaddress Using a subaddress enables you to connect up to eight ISDN terminals to the same ISDN telephone number and line. The terminals are addressed by using different subaddresses.
78 T ANDBERG Videoconferencing System Advanced use MSN (Multiple Subscriber Number) The use of MSN (Multiple Subscriber Number) enables you to attach different ISDN terminals, with different numbers, to the same physical ISDN telephone line.
T ANDBERG Videoconferencing System 79 Advanced use PRI Switch T yp e Select the type of PRI switch to which your unit is connected. ISDN-PRI Settings Number Enter the main number for your PRI line.
80 T ANDBERG Videoconferencing System Advanced use Channel Hunting Below is a list of common ISDN-PRI/T1 switches. T y pe Manufacturer PRI Switch T ype setting A TT 4 ESS A T & T A T&T ISDN A .
T ANDBERG Videoconferencing System 81 Advanced use Advanced ISDN Settings This is the same menu as for ISDN-BRI. The settings will be common for ISDN BRI and ISDN PRI. Please refer to section ‘ISDN-BRI Settings’. Line Settings ‘T1 Cable Length 1’ specifies the distance to the CSU connected to the ‘E1/T1 1’ port on codec 1.
82 T ANDBERG Videoconferencing System Advanced use Advanced ISDN-PRI Settings NSF - Non S tandard Facility . Y our network provider may require a service selection in your ISDN configuration. Enter the Service code here. V alid NSF service codes are from 1 to 31.
T ANDBERG Videoconferencing System 83 Advanced use Leased E1/T1 Settings Call Control Auto: The call connects automatically when video data is present. Manual: The call has to be connected manually . Network Interface Indicates if the network is of type E1 (30 channels) or T1 (24 channels).
84 T ANDBERG Videoconferencing System Advanced use External network settings Before using the system together with external network equipment, you must specify the network parameters on this page. T HE SYSTEM HAS SUPPORT FOR UP TO 768 KBPS /2M BPS USING THE E XTERNAL N ETWORK (RS449/V .
T ANDBERG Videoconferencing System 85 Advanced use Network clocking The network clock setting specifies the number of physical external clock signals. Use ‘ RS449/V35 Compatible ’ when the external equipment provides two clock signals, one for transmit and one for receive.
86 T ANDBERG Videoconferencing System Advanced use Address Address is defined as the IP-address of a streaming client, streaming server or a multicast address. Giving an address in the range 224.0.0.1-239.255.255.255 will broadcast the stream to any host that has joined the specified multicast group.
T ANDBERG Videoconferencing System 87 Advanced use Streaming Source Auto Enables streaming of both local and far end video. Selection of which site to be streamed is done using voice switching (the site that speaks is streamed). Local Only the local video will be streamed.
88 T ANDBERG Videoconferencing System Advanced use H.323 Settings E.164 alias This is the E.164 address of the codec. The E.164 address is equivalent to a telephone number , sometimes combined with access codes. V alid characters are 0-9,* and #. When using a gatekeeper the codec will send a message to the gatekeeper containing both the E.
T ANDBERG Videoconferencing System 89 Advanced use Advanced H.323 Settings T HESE SETTINGS ONL Y HA VE AN EFFECT IF THEY ARE SUPPORTED BY YOUR IP INFRA STRUCTURE . NOTE RSVP Auto Resource Reservation Protocol enables the endpoints to request the optimal amount of bandwidth for the duration of an IP video conference.
90 T ANDBERG Videoconferencing System Advanced use IP Precedence Used to define which priority audio, video, data and signalling should have in the network. Higher numbers indicate higher priority . The priority ranges from 0(of f) - 7 for each type of packets .
T ANDBERG Videoconferencing System 91 Advanced use IP Settings IP-assignment DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present. DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by the DHCP server .
92 T ANDBERG Videoconferencing System Advanced use Ethernet Speed Auto The codec will auto-detect the speed/duplex on the LAN. 10/Half The codec will connect to the LAN using 10Mbps speed/Half Duplex. 10/Full 10 Mbps speed/Full Duplex. 100/Half 100 Mbps speed/Half Duplex.
T ANDBERG Videoconferencing System 93 Advanced use Call Settings Incoming MCU calls On : When you are in a call, the system will provide visual and audible indications of an incoming call and ask you to accept/reject the call. Off : The system will not accept incoming calls when you are in a call.
94 T ANDBERG Videoconferencing System Advanced use Encryption (Secure Conference) Auto The system will try to set up calls using encryption. Point to point calls: If the far end system supports encryption, the call will be encrypted. If not, the call will proceed without encryption.
T ANDBERG Videoconferencing System 95 Advanced use This menu consists of 6 network profiles, a prefix can be added for each profile. If you add a prefix to a profile, this prefix will automatically be added to the number being dialed. E XAMPLE : 0 IS ADDED AS A C ALL P REFIX TO THE 2 ND PROFILE , ISDN.
96 T ANDBERG Videoconferencing System Advanced use NOTE Dat aport configuration The system provides two standard RS232 serial ports to allow a computer to be connected for data transfer and control purposes. W HEN CONNECTING TO A PC THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH RS232 CABLE .
T ANDBERG Videoconferencing System 97 Advanced use Dataport 2 Dataport 2 is dedicated to the main camera and will not be available in standard configuration. The Codec will automatically detect W A VE cameras. If you are using a camera supporting the VISCA protocol, select ‘ Mode: VISCA ’.
98 T ANDBERG Videoconferencing System Advanced use Sof tware Options The system requires a valid option key to activate Security (contains Secure Conference AES), MultiSite and/or Presenter functionality . A rest art of the system is required after entering a new option key .
T ANDBERG Videoconferencing System 99 Advanced use Channel status Comprehensive information about the call progress is available through the Channel S tatus window . This window indicates the various stages each B-channel goes through whilst establishing a connection.
100 T ANDBERG Videoconferencing System Advanced use P RESS M ENU AND THEN ’ C ALL S T A TUS ’ TO BRING THIS MENU UP WHEN NOT IN THE MENU SYSTEM . The numbers used to call out to the far end are shown in the window . If an error occurs a cause code will be displayed on the right hand side of the window .
T ANDBERG Videoconferencing System 101 Advanced use Please contact your T ANDBERG representative for further information. Restore defaults Y ou may restore all system settings to the factory default using this function.
102 T ANDBERG Videoconferencing System Advanced use T est subsystem Y ou can test the different subsystems of your videoconferencing equipment. Far End Loop (ISDN only) SetLocal: This system will loop all incoming audio and video. · The far end will see its own video and hear its own audio.
T ANDBERG Videoconferencing System 103 Peripherals Peripheral Equipment Using the optional peripheral devices outlined in this chapter and the many others available, you will be able to build your own applications for use with the system, thereby better integrating the system into your business environment.
104 T ANDBERG Videoconferencing System Peripherals 5 Video Inputs • 2 video inputs supporting S-Video through Mini-DIN connectors. • 2 video inputs supporting composite signals through RCA connectors. • 1 VGA input supporting resolutions VGA(640x480), SVGA(800X600) and XGA(1024x768) (auto sensing).
T ANDBERG Videoconferencing System 105 Peripherals Dual Monitor The Dual Monitor can be used to show full screen selfview , snapshots and Duo V ideo. T o use the system in the Dual Monitor configuration: • Connect ‘V ideo Out 2’ (preferably) otherwise 4 on the system to a video input on the dual monitor .
106 T ANDBERG Videoconferencing System Peripherals Document camera A document camera can be used for showing text, diagrams and a variety of graphical material as well as small three-dimensional objects. T o use a document camera with your system: • Connect the document camera to the DocCam input on the Codec.
T ANDBERG Videoconferencing System 107 Peripherals Multiple controllable cameras Attaching multiple cameras to one system expands visibility and is useful in large group applications. The system is able to control up to 4 W A VE-cameras. Optional WA VE cameras are supplied with the necessary cabling.
108 T ANDBERG Videoconferencing System Peripherals AudioScience microphone T ANDBERG's award-winning AudioScience microphone is a ceiling-mounted, wide coverage, boundary microphone, that can eliminate the need for table microphones.
T ANDBERG Videoconferencing System 109 Peripherals Video Cassette Recorder (VCR) VCR - Playback For playback, connect a cable between Video Out on the VCR and ‘VideoIn 4 (VCR)’ on the system. Connect a cable between Audio Out on the VCR and the VCR audio input on the system.
110 T ANDBERG Videoconferencing System Peripherals T elephone Add-On A telephone add-on is used when you want to include a telephony p articipant in the meeting. Y ou can also use this functionality when you want to have conference participants in an adjacent room with its own microphone and speaker system.
T ANDBERG Videoconferencing System 111 Peripherals Additional microphones If your environment is such that you require more than one microphone for your room, e.g. you have a whiteboard at a distance from your table microphone, it is possible to connect additional microphones to your system.
112 T ANDBERG Videoconferencing System Appendices Appendices Appendix 1: Connecting the system to ISDN using NT1 network adapters Connecting Connect the first ISDN cable from ISDN 1 on the codec to the S-interface on your first NT1 network adapter . Connect the other ISDN cables to the appropriate NT1 network adapters.
T ANDBERG Videoconferencing System 113 Appendices Appendix 2: Connecting the system to the Switched 56 network Using T elesync TS-256 SW56/ISDN adapter Connecting the system to the SW56 network using a T elesync Adapter is described below . NOTE: There are dif ferent T elesync Adapters for different configurations of SW56 networks.
114 T ANDBERG Videoconferencing System Appendices Appendix 3: Connecting the system to PRI/T1 Using CSU adapter Connecting the system to the ISDN network via the E1/T1-interface using an Adtran T1 ESF CSU ACE will allow up to 1.
T ANDBERG Videoconferencing System 115 Appendices Appendix 4: Environment al considerations This section explains how to carry out basic adjustments and simple tests to ensure that you send and receive the best possible image and audio quality when using your system.
116 T ANDBERG Videoconferencing System Appendices How to prepare a typical room for videoconferencing The diagram below shows a typical room designed to obtain the best results when using the system. The microphone should be placed at the front of the table to ensure that all speech will be detected.
T ANDBERG Videoconferencing System 117 Appendices Appendix 5: Using the file system It is possible to access a file system within the T ANDBERG system by using ftp: DOS-window: ftp <IP-address of codec>, or Web-browser: ftp:// <IP-address of codec> Description of the different files all.
118 T ANDBERG Videoconferencing System Appendices Custom logos · Go to the folder where your logo is located. L OGO MAX SIZE : 704 X 480, FILE - FORMA T : JPG . I F THE FILE IS TOO LARGE , NO LOGO WILL BE DISPLAYE D . · T ype “f tp <IP-address of your local codec>”.
T ANDBERG Videoconferencing System 119 Appendices Appendix 6: Security The T ANDBERG Videoconferencing Unit has several features both to protect from unauthorized use and system access: Access Code: When ‘Access Code’ is enabled, the user will be asked to enter an access code before he/she is able to make a call.
120 T ANDBERG Videoconferencing System Appendices Streaming password By setting a streaming password in the streaming menu on the T ANDBERG codec, a password have to be entered on the streaming client to be able to see the videostream from the T ANDBERG V ideoconferencing Unit.
T ANDBERG Videoconferencing System 121 Appendices Encryption All T ANDBERG systems support both AES* and DES encryption. By default this feature is enabled such that when connecting with any other video system or MCU, a T ANDBERG system will attempt to establish a secure conference using AES* or DES encryption.
122 T ANDBERG Videoconferencing System Appendices Appendix 7: Declaration of Conformity.
T ANDBERG Videoconferencing System 123 Index Index A Access Code 25, 93, 119 Add Duo V ideo 40 Add MultiSite Entry 31 Add New Entry 30 Adding an extra site 44, 45 Additional microphone 111 Adjusting v.
124 T ANDBERG Videoconferencing System Index videoconferences 116 HumFilter 64 I Incoming MCU calls 93 Installation 13 Intelligent Call Management (ICM) 10 Interfaces 103 Introduction 7 IP Address Con.
T ANDBERG Videoconferencing System 125 Index System start-up 22 T T .120 96 T able microphone 12 T ake chair 60 T elephone Add-On 1 10 T erminal ID 59 T erminal settings 73 T erminate meeting 60 T ext.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TANDBERG 7000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TANDBERG 7000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TANDBERG 7000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TANDBERG 7000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TANDBERG 7000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TANDBERG 7000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TANDBERG 7000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TANDBERG 7000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
