Manuale d’uso / di manutenzione del prodotto 17RTC del fabbricante Vax
Vai alla pagina of 32
17/19-INCH PREMIUM TFT-LCD MONITOR INSTRUCTION MANUAL 17RTC / 19RTC INSTRUCTION MANUAL Please read this manual thoro ughly before us e, and ke ep it handy for future reference.
SAFETY INSTRUCTION……………………………… …………………………………….2 - 3 CAUTIONS ……………………………… ………..…… ……………… ………… ……………..4 FCC RF INTERFERENCE STATEMENT …… …… ……………………………… ………….
1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instruction s marked on the product. 4. Unplug this product from the wall outlet before cle an ing. Do not use liquid cleaners or ae rosol cleaners.
Refer all servicing to service personnel. 14. Unplug this product from the wall ou tlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product.
▶ NEVER REMOVE THE BACK COV ER Removal of the back cover should be carri ed out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home.
NOTE This equipment has been tested a nd fou nd to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. T hese limits are designe d to provide rea sonable protection against harmful interference i n a residential installation.
A. BOTTOM PANEL CONTROL 1. DC 12V IN 2. COMPONENT Y,Pb,Pr & SOUND L,R IN 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN (OPTION) B. SIDE PANEL CONTROL 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 3. VIDEO 2(AV2) IN 4. VIDEO 2(AV2) OUT 5. S-VIDEO (Y/C) IN 6.
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 9. AUTO Auto geometry adjustment in PC Source. 10. MUTE Mute the sound.
D. FRONT KEY CONTROL 1. POWER ON/OFF( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay ap pears. 2. MENU / EXIT Activates and exits the On Screen Display. 3. SOURCE/SELECT Select PC or video source. Select On Screen Display menu 4 / 5.
OSD MENU DESCRIPTION A: CUSTOM MENU (Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Custom sub menu. Press the left(◀) / right( ▶ ) button to adjust picture setting.
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Custom sub menu. Press (◀) / right( ▶ ) button to adjust picture setting. Press the MENU button to save.
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode.
2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Color Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button to sele ct the desired color tone.
3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute.
4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume. Press (◀) / right( ▶ ) button to adjust Volume. Press the MENU button to save.
Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Size. Press the MENU button to save. 6. PC (Only PC mode) Press the up( ▲ ) / down( ▼ ) button to sel .
Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem ents.
1. PIP Press the up( ▲ ) / down( ▼ ) button to sel ect the PIP. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up( ▲ ) / down( ▼ ) button to sel ect the Input Source.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Input Source. Press the MENU button to save.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Size. Press the MENU button to save. 4. Position Press the up( ▲ ) / down( ▼ ) button to sel ect the Positi on.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Position. Press the MENU button to save. 5. Swap Press the up( ▲ ) / down( ▼ ) button to sel ect the Swap.
5. Sound Select Press the up( ▲ ) / down( ▼ ) button to sel ect the Soun d Select. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Sound Select.
D. SETUP MENU Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Setup me nu. Press the right( ▶ ) or ENTER button . 1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values.
2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Language menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect language.
3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the desire OSD Tone.
4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off.
5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lock menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to select on or off Press the MENU button to save.
Wall mount installation : 1) Remove the monitor stand bracket assembled with the monitor. 2) Us e the VESA standard mount ing design and the 100mm hole pattern on the back pan el to install the L CD monit or to the (Optional) mounting bracket sold separately .
▶ PIN ASSIGNMENTS ▶ ACCESSORY 1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor 5. Remote Control 6. Batteries 7. Wall mount (Option) 8. Rack mount (Option) INSTRUCTION MANUAL ………….
This monitor features a power m anagement sy stem to “power d o wn” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal.
17“ 19“ 17 ˝ Diagonal AM-TFT(A ctive-Matrix) 19 ˝ Diagonal A M-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) 0.264(V) Pixel pitch(mm) : 0.294(H) 0.
WEEE Symbols 31 ………………………………… ………………………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Wa.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Vax 17RTC è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Vax 17RTC - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Vax 17RTC imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Vax 17RTC ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Vax 17RTC, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Vax 17RTC.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Vax 17RTC. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Vax 17RTC insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
