






Do not dispose of the product in unsuitable containers.
Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe‘s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.
The product is in accordance with the applicable safety standards in the European directives.
WARNING Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Keep the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:
Read the user manual.
Risk of personal injury.
Risk of electric shock.
Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.
Wear safety goggles. Wear hearing protection.
Wear a dust mask.
Double insulated.

Kickback Kickback is the upward and backward movement of the saw blade when the saw blade unexpectedly touches an object. Securely hold the machine during use. Keep your attention focused on the operation.
Technical data Mains voltage 230 V~ Mains frequency 50 Hz Power input 570 W No-load speed 500 - 3,000/min Max. sawing depth (wood) 70 mm Max. sawing stroke 18 mm Mitre angle 45° Number of pendulum positions 4 Weight 2.0 kg Noise and vibration Sound pressure (Lpa) 90.4 dB(A) K=3dB Acoustic power (Lwa) 101.4 dB(A) K=3dB Vibration (wood) 7.7 m/s2 K=1.5 m/s2 Vibration (metal) 13.0 m/s2 K=1.5 m/s2
materials with the rotating saw blade; - a blunt saw blade; - a saw blade that is not properly mounted; - sawing into a previous cut; - a lack of attention to the operation; - an instable stance.
Wear hearing protection.
Always check that the voltage of the power supply corresponds to the voltage on the rating plate.
Vibration level The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with
different or poorly maintainted accessories, may significantly increase the exposure level - the times when the tool is switched off or when
Mains plug replacement (UK only) If the moulded 3-pin plug attached to the unit is damaged and needs replacing, it is important that it is correctly destroyed and replaced by an approved BS 1363/5A fused plug and that the following wiring instructions are followed. The wires in the mains cable are coloured in accordance with the following code: blue neutral brown live
it is running but not actually doing the job, may significantly reduce the exposure level
Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns
As the colours of the wires in the mains cable of the unit may not correspond to the coloured markings identifying the terminals in the plug, proceed as follows: - The wire which is coloured blue must be
Your pendulum action jigsaw has been designed for sawing wood, metal, plastics, ceramics, rubber, etc. to any required size and in any required shape. 1. On/off switch 2. Lock-on button 3. Speed adjustment wheel 4. Pendulum action switch 5. Guard 6. Saw blade holder 7. Saw shoe
connected to the terminal which is marked with the letter N or coloured black. - The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured red.
Electrical safety

8. Allen screw for parallel guide 9. Scale for mitre angle 10. Dust extraction connection 11. Grip 12. Allen key 13. Allen key holder
Mounting and removing the parallel guide (fig. C) The parallel guide is used for sawing along edges at a maximum distance of 16 cm.
Before assembly, always switch off the machine and remove the mains plug from the mains.
Mounting and removing the saw blade (fig. B) Refer to the table below to select the required saw blade.
Saw blade Material Coarse Wood Medium Wood Fine Steel, aluminium, plastic Very fine Wood (curves)
Do not attempt to remove the guard from the machine.
Setting the speed (fig. A) The speed adjustment wheel is used for setting the speed. The speed adjustment wheel can be set to 6 positions. The ideal speed depends on the profile and the teeth of the saw blade and on the material to be worked.
Do not set the speed during use.

teeth and select a lower speed. - For soft materials, use a saw blade with coarse
teeth and select a higher speed.
Setting the mitre angle (fig. D) The mitre angle is variable between 0° and 45°. The mitre angle can be read from the scale (9).
Do not set the mitre angle during use.
Using the pendulum action switch (fig. A) The pendulum action switch is used to set the way in which the teeth of the saw blade grip the material. The pendulum action switch can be set to 4 positions.
Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.
Do not set the pendulum position during use.
Replacing the saw blade (fig. B) Worn or damaged saw blades must be replaced immediately.
Material Pendulum position Wood 1-3 Plastics 1 Aluminium 0-1 Steel 0 Ceramics 0 Rubber 0
Only use sharp and undamaged saw blades.

The product, the accessories, and the packaging must be sorted for environmentally friendly recycling.
Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.
Consult the enclosed warranty terms.
The product and the user manual are subject to change. Specifications can be changed without further notice.
Disposal
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.